Filter
Top Products
5
RQTV0288
Program play
This function allows you to display the information of the current track.
Press [DISPLAY] repeatedly during play or pause.
Maximum number of displayable characters: approximately 30.
This unit supports ver. 1.0 & 1.1 ID3 tags. Text data that is not
supported will not be displayed.
ID3 is a tag embedded in MP3 tracks to provide information about the
track.
•
•
•
Press [PLAY MODE] to select the desired mode.
You can repeat program play or other selected play mode.
Press [REPEAT] before or during play.
“REPEAT ON” and “ & ” are displayed.
To cancel
Press [REPEAT] again.
“REPEAT OFF” is displayed and “ & ” is cleared.
Mode To play
1-TRACK
1TR
one selected track on the disc.
Press the numbered buttons to select the track.
1-ALBUM
1ALBUM
one selected album on the disc.
Press [ or , ALBUM] to select the album.
RANDOM
RND
a disc randomly.
1-ALBUM
RANDOM
1ALBUM RND
all tracks in one selected album randomly.
Press [ or , ALBUM] to select the album.
MP3
MP3
CD
MP3
Note
Note
Press [8, POWER] to turn the unit on.
Press [;, OPEN/CLOSE] to open the CD lid and then set the CD in
place.
Press [;, OPEN/CLOSE] again to close the lid.
Keep fingers away from the CD lid when it is closing to avoid possible
minor injury.
Label must face outward.
Press until you hear it click into place.
Press [CD q/h] to start play.
Adjust the volume.
Be sure to press the [;, OPEN/CLOSE] button to open and close the
CD lid.
Damage may occur if the lid is forced closed.
During standby, if the CD is ready in the unit, the unit comes on and
play begins. (One touch play)
•
•
•
Basic play
Disc operations
Stop
Press [g].
Pause
Press [CD q/h]. Press again to resume play.
Skip/Search
Press [u, 2] or [i, 1] to skip.
Press and hold [u, 2] or [i, 1] to search.
You can search during play or while paused.
You cannot search through MP3 files.
You can only search within the current track during
program play, one track repeat, and random play.
•
•
•
Skip album Press [ or , ALBUM] in the play mode.
Press [ or , ALBUM] once and then the numbered
buttons in the stop mode.
Direct access
play
(Play starts with
the track you
select.)
Press the numbered buttons to select the
desired track.
Press [ or , ALBUM ] to select the album.
Press [i, 1] once and then press the numbered
buttons to select the desired track.
Note
Note
The function allows you to program up to 24 tracks.
Press [PGM, -AUTO PRESET] while stopped.
Press the numbered buttons to select tracks. (Maximum 24 tracks)
Repeat this step to program other tracks.
Press [CD q/h] to start play.
Press [PGM, -AUTO PRESET] while stopped.
Press [ or , ALBUM] to select your desired album.
Press [i, 1] once and then press the numbered buttons to
select tracks. (Maximum 24 tracks)
Press [ENTER].
Repeat step 2 to 4 to program other tracks.
Press [CD q/h] to start play.
g Confirm a
programmed
track
Press [u, 2] or [i, 1] when “PGM” is
displayed in the stop mode. To check while
programming, press [PGM, -AUTO PRESET]
twice after “PGM” appears, then press [u, 2]
or [i, 1].
g Delete the last
track
Press [DEL] in the stop mode.
g Delete all
programs
Press [CLEAR] in the stop
mode.
“CLR ALL” is displayed.
g Cancel program
mode
Press [PGM, -AUTO PRESET] in the stop
mode to clear “PGM” indicator from the display.
Program contents are stored in the unit’s memory even after changing to
a different function or turning the unit off. All program contents are erased
by pressing [CLEAR] or by opening the CD lid.
Track number Program number
Note
PGM
Album number Track number
MP3
CD
MP3
CD
MP3
➡ Page 3 for the buttons position of remote control and main unit.
During random play, you cannot skip to previous track.
Play Mode function
Display function
Repeat play
Elapsed play time Remaining play time
Elapsed time Album name Track name
ID3 (Artist) ID3 (Track) ID3 (Album)
Headphones (not included)
Portable audio equipment (Cords and equipment not included)
Plug type: 3.5 mm (1/8”) stereo
SC-EN38_P,PC (RQTV0288)_running change1.indd 5 2/20/2008 9:54:57 AM