Panasonic SCEN38 Stereo System User Manual


 
4
RQTV0288
Speakers
Stop
Press [g].
Pause
Press [CD q/h]. Press again to resume play.
Skip/Search
Press [u, 2] or [i, 1] to skip.
Press and hold [u, 2] or [i, 1] to search.
You can search during play or while paused.
You cannot search through MP3 files.
You can only search within the current track during
program play, one track repeat, and random play.
Skip album Press [ or , ALBUM] in the play mode.
Press [ or , ALBUM] once and then the numbered
buttons in the stop mode.
Direct access
play
(Play starts with
the track you
select.)
Press the numbered buttons to select the
desired track.
Press [ or , ALBUM ] to select the album.
Press [i, 1] once and then press the numbered
buttons to select the desired track.
Keep your speakers at least 10 mm
(13/32”) away from the system for proper
ventilation.
These speakers do not have magnetic
shielding. Do not place them near
televisions, personal computers or other
devices easily influenced by magnetism.
You cannot take the front net off the
speakers.
Note
Caution
Use the speakers only with the
recommended system. Failure to do so
may lead to damage to the amplifier and/or
speakers, and may result in the risk of fire.
Consult a qualified service person if damage
has occurred or if you experience a sudden
change in performance.
Do not attach these speakers to walls or
ceilings.
1
2
3
FM/AM antenna
Taped part
FM antenna
AM antenna
Headphones (not included)
Reduce the volume level and connect the headphones.
Plug type: 3.5 mm (1/8”) stereo
Note
1
2
Red (+)
Black (-)
AC power supply cord
To household AC outlet
Conserving power
The unit consumes 2.6 W even it is turned off with
[8, POWER]. To save power when the unit is not to be
used for a long time, unplug it from the household AC
outlet.
Remember to reset the radio stations and any other
memory items before using the unit again.
If the unit is left unplugged for longer than approximately
two weeks, all settings will revert to the factory settings.
Connect the AC power supply
cord after all other connections
are complete.
Note
Red Black
Portable audio equipment (Cords and equipment not included)
Portable audio player Plug type: 3.5 mm (1/8”) stereo
Start playback from the portable
audio source.
Note
MAIN UNIT REMOTE CONTROL
iPod connection
Insert your iPod into the Built-in iPod Dock.
Refer to page 7 for further information.
Unplug the antenna connector by holding the taped part.
Stand the antenna up on its base.
To prevent hearing damage, avoid listening for prolonged
periods of time.
Adjust the volume and sound quality of this unit and the other equipment.
For details, refer to the instruction manual of the other equipment.
Attach the stand to the unit
Page 3 for the buttons position of remote control and main unit.
Connections
Support stand
(included)
Rear of the main unit
PC Sync
Connect your PC to the PC Sync port.
Refer to page 7 for further information.
1
2
3
Placement of speakers
Ensure the stand is securely attached to the main unit
for stabilization.
Insert the stand fully until
a click sound is heard.
The supplied stand is specially designed for use
with this unit.
Only use as indicated in this setup.
Speakers are designed identically so
that no left or right channel orientation
is necessary.
Note
SC-EN38_P,PC (RQTV0288)_running change1.indd 4 2/20/2008 9:54:52 AM