36
VQT3X49
¾HDMI Resolution
The items supported by the connected devices are
indicated on the screen as “
¢
”. When any item
without “
¢
” is selected, the images may be distorted.
≥ If “Auto” is selected, the best suited output
resolution to the connected television is
automatically selected.
≥ To enjoy high-definition video up-converted to
1080p, you need to connect the unit directly
to 1080p compatible HDTV (High Definition
Television). If this unit is connected to an
HDTV through other equipment, the other
equipment must also be 1080p compatible.
¾24p Output
When this unit is connected to a TV supporting 1080/
24p output using an HDMI cable, movies and other
material recorded at 24p are output at 24p.
≥
When playing DVD-Video, set to “On” and then set
“24p” in “Video Settings” (
>
33) to “On”.
≥ When BD-Video images other than 24p are
played, images are output at 60p.
≥
24p: A progressive image recorded at a rate of 24
frames per second (motion-picture film). Many
BD-Video movie contents are recorded in 24 frames/
second in accordance with the film materials.
¾HDMI Color Mode
This setting is for selecting color-space
conversion of the image signal when the unit is
connected using an HDMI cable.
¾Deep Color Output
This setting is for selecting whether to use Deep
Color output when a television that supports
Deep Color is connected.
¾Contents Type Flag
Depending on the playback content, the TV will
output adjusting to the optimal method when a
TV that supports this function is connected.
¾HDMI Standby Pass-Through
Even if this unit is in standby mode, a device
connected with this unit can output videos and
sound to the TV.
Moreover, you can switch the HDMI input terminal by
pressing [EXT-IN] on the remote control.
≥ Sound will not be output from this unit's
speakers.
∫ Still Mode (paused video)
Select the type of picture shown when you pause
playback.
∫ Seamless Play
The chapter segments in playlists are played
seamlessly.
≥ Select “On”, when the picture freezes for a
moment at the chapters segment in playlists.
∫ Black Level Control
(This works only for video output from the VIDEO
OUT terminal.)
Select lighter or darker for adjusting the black level
to the desired setting for picture enhancement.
∫ Surround Effects (> 34)
∫ Sound Effects (> 34)
∫ Dynamic Range Compression
You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby
TrueHD only)
≥
“Auto” is effective only when playing Dolby TrueHD.
∫ Digital Audio Output
Press [OK] to show the following settings:
¾Dolby D/Dolby D +/Dolby TrueHD
¾DTS/DTS-HD
Select the audio signal to output.
≥
Select “PCM”, when the connected equipment
cannot decode the respective audio format.
This unit decodes the audio format and
transmits to the connected equipment.
≥
Not making the proper settings may result in noise.
¾BD-Video Secondary Audio
Select whether or not to mix the primary and
secondary audio (including the button click sound).
If “Off” is selected, the unit outputs the primary audio only.
Auto
Automatically selects the type of
picture shown.
Field
Select if jittering occurs when “Auto” is
selected.
Frame
Select if small text or fine patterns cannot
be seen clearly when “Auto” is selected.
Audio
SC-BTT490P_eng.book 36 ページ 2012年2月22日 水曜日 午前9時1分