Panasonic SC-ALL8 Home Theater System User Manual


 
- 31 -
The mode indicator (amber) keeps blinking twice.
This unit is not connected to the network. Touch any switch, and then
check the network connection. (l 12)
The mode indicator (amber) keeps blinking three times.
The update has been failed. Touch any switch, and then try again.
The mode indicator (amber) keeps blinking fast.
An error has occurred. Disconnect the AC power supply cord (AC mains
lead) and reconnect it. Turn the unit on and try again.
The network indicator (red) keeps blinking.
This unit is not connected to the network. Check the network
connection. (l 12)
Cannot connect to the network.
This unit’s Wi-Fi security supports WPA2™ only. Use a wireless router
that provides a WPA2™ connection. For details on security supported
by the router, refer to the operating instructions of the router.
If the network is set to be invisible, make the network visible while you
set up the network for this unit or make a wired LAN connection. (l 18)
Make sure that the multicast function on the wireless router is enabled.
Depending on the routers, WPS button may not work. Try other
methods. (l 12)
The device name is not changed.
Turn off “Network standby” (l 16), and turn this unit off and on.
Firmware updates
Network