Panasonic SC-AK77 CD Player User Manual


 
33
RQT5769
Timer and others
Previous display
Using the timer
Using the play/record timer
The timer has two functions. It can be set to on at a certain time to
wake you up, or it can be set to record the radio or from the aux
source.
The play timer cannot be used in combination with the record timer.
Preparations
Turn the unit on and set the clock (A page 13).
For the play timer, prepare the music source you want to listen to;
tape, CD, radio, aux, or 6-channel input, and set the volume.
For the record timer, check the cassette’s erasure prevention tabs
(A page 22: B), insert the tape in deck 2, select the reverse mode
(for SC-AK77) (A page 24) and tune to the radio station (A page
14) or select the aux source (A page 35).
You cannot record when [6CH INPUT] is selected.
Press [CLOCK/TIMER] to select the timer function.
Every time you press the button:
CLOCK RECPLAY
rPLAY : to set the play timer
rREC : to set the record timer
Setting the start and finish times
1 (Within 8 seconds or so)
Press [TUNE/TIME ADJ (3) or (4)] to select the
starting time.
2 Press [CLOCK/TIMER].
1 Press [TUNE/TIME ADJ (3) or (4)] to select the
finishing time.
2 Press [CLOCK/TIMER].
The start and finish times are now set.
Turning the timer on
Press [rPLAY/rREC] to display the timer indicator.
Every time you press the button:
RECPLAY
(OFF)
rPLAY : to turn the play timer on
rREC : to turn the record timer on
(The indicator doesnt appear if the start and finish times or the
clock havent been set.)
Press [f/I, POWER] to turn the unit off.
The unit must be off for the timers to operate.
For play timer
The timer play will start at the preset time with volume
increasing gradually up to the volume level you preset.
For record timer
The record timer comes on about 30 seconds earlier than
the set time.
To cancel the timer
Press [rPLAY/rREC] to clear the timer indicators from the display.
(The timer comes on at the set time everyday if the timer is on.)
To change the settings (when unit is on)
To change the play/record times
Do steps 1, 2, 3 and 5.
To change the source or volume
1. Press [rPLAY/rREC] to clear the timer indicator from the
display.
2. Make changes to the source or volume.
3. Do steps 4 to 5.
(Continued on next page)
1
2
3
4
5
PLAY
REC
SC-AK77
SC-AK66
SC-AK77
SC-AK66
FOR PLAY TIMER
FOR RECORD TIMER
FOR PLAY TIMER
FOR RECORD TIMER
FOR PLAY TIMER
FOR RECORD TIMER
FOR PLAY TIMER
FOR RECORD TIMER
5
4
1
3
2
2
3
SC-AK62
SC-AK62
33-35 AK77/66/62 [P/PC] 13/7/01, 2:44 pm33