Filter
Top Products
25
Recording operations
RQT5769
1
2
3
5
6
DISC
DISC
DISC
SC-AK66
DISC
FLAT
SC-AK77 only
SC-AK77
CD 1 CD 2 CD 3 CD 4 CD 5
DISC
2
3
6
1
5
2
2
REC
SC-AK62
Recording from compact discs
Wind up the leader tape so recording can begin immediately.
Press [c DECK 2 OPEN] and insert the tape.
Close the holder by hand.
only
Press [REV MODE] to select the reverse mode.
Every time you press the button:
: One side only records.
,
: Both sides (front → reverse) record.
automatically changes to “ ” when [aREC/STOP]
is pressed.
Press [CD].
Insert CD in the tray.
(Perform steps 1 ~ 2 on page 17).
Press [(CD 1) ~ (CD 5)] to select the disc you want.
Pressing [L] will stop playback.
Press [a
REC/STOP] to start recording.
• The recording will proceed from the first track on the selected
CD and will continue on through the last track of the final disc
(page 17).
•
The tape deck stops automatically when the CD is finished.
To stop recording
•
To add a 4 second silent interval before stopping
Press [L]. The CD will stop automatically too.
•
To stop recording without a silent interval
Press [a REC/STOP]. The CD will stop automatically too.
To record programmed tracks
1. After step 4, program the track you want (perform steps 2 ~ 6
on page 19).
2. Press [a REC/STOP] to start recording.
To start recording on the reverse side
Load a tape and change the tape direction as follows:
1. Press [TAPE, DECK 1/2] and select tape deck 2.
2. Press [// J] and immediately thereafter [L]. The tape direction
will be shown as “4”.
To record on the other side of the tape
Turn the tape over and press [a REC/STOP].
“ ”
SC-AK77
SC-AK77
SC-AK66
SC-AK62
25-26 AK77/66/62 [P/PC] 13/7/01, 2:02 pm25