Panasonic SC-HT940 Home Theater System User Manual


 
liiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
AUDIO
OUT
L©%,:
Television
(not included)
This audio connection will enable you to play audio from your
Back of the main unit television through your home theater system, Refer to "Operating other
equipment" (4 page 30).
Audio cable _(not included)
Connect the audio cable to the TV AUDIO IN
terminal on the main unit and select "TV" as the
input source (SELECTOR -I. page 11),
Television (not included)
Video cable (included)
Back of the main unit
i
COMPONENT VIDEO OUT
Television
(not included) Video cables
(not included)
A'_ _
/\
;'r
Back of the
main unit
Using the COMPONENT VIDEO OUT terminals
The COMPONENT VIDEO OUT terminals provides a purer picture than
the S-VIDEO OUT terminal, These terminals can be used for either
interlaced or progressive output, Connection using these terminals
outputs the color difference signals (PB/PR)and luminance signal (Y)
separately in order to achieve high fidelity in reproducing colors,
The description of the component video input terminals depends on
the television or monitor (e.g, Y/PB/PR, Y/B-Y/R-Y, Y/CB/CR). Connect
to terminals of the same color.
After making this connection, select "Darker" from the "Black Level
Control" in the "Video" tab (.-.) page 24),
S-VIDEO OUT
Back of the
Television main unit
(not included)
_ (notS'vide°included)!cable _
Using the S-VIDEO OUT terminal
The S-VIDEO OUT terminal achieves a more vivid picture than the
VIDEO OUT terminal by separating the chreminance (C) and luminance
(Y) signals, (Actual results depend on the television,)
Cable TV box or video cassette recorder connection
Cable TV box or video cassette recorder
(not included)
To your cable tV _ (Tne_tiv_iu°dned)
service or television I _J,_
antenna __
RF cable
(not included)
AUDIO
OUT
Audio cable _(not included)
HT940_
Connect the audio cable to
the TV AUDIO IN terminal
on the main unit and select
"TV" as the input source
(SELECTOR .4. page 11).
Back of the main unit
AU×
Video cable
(included)
I
NT94e
YOUcan use the AUX terminal for
the audio input when you connect
another external device (e.g.
video cassette recorder), Select
"AUX" as the input source