Filter
Top Products
35
RQT6951
You can change the quality of the picture to suit the material you are
playing.
Press [PICTURE MODE].
Each time you press the button:
A.STANDARD: for recordings of television program
ll (Factory preset)
lu
l DYNAMIC: Clear, vivid pictures for scenery and sports
ll
lu
a- SOFT: for prerecorded tapes
Press and hold [1] (play) for about five
seconds.
“R1” appears on the television.
At the end of the program, the tape rewinds to the beginning of the
program and plays it again. (It only works if there is a five-second
blank at the end of the program.) This repeats until you cancel it.
To cancel
Press [1] (play).
≥It also cancels if you stop, pause, cue, or review.
This unit has an automatic digital tracking control feature that usually
makes tracking adjustments for you, but you may need to do it
manually, such as if noise appears on a tape recorded on other
equipment.
During play
Press [3 CHW] or [4 CHX].
Repeat until the noise disappears.
To return to automatic digital tracking control
Press [3 CHW] and [4 CHX] at the same time.
To remove the noise from a paused picture
Start slow play, then adjust the tracking.
[Note]
This may not be effective on some tapes.
Adjust the vertical to stop the picture jiggling while paused.
While paused
Press [3 CHW] or [4 CHX].
Repeat until the jiggling stops.
To return to the previous condition
Press [3 CHW] and [4 CHX] at the same time.
[Note]
This may not work with some televisions. Try adjusting the vertical
on the television itself.
Picture mode—Changing picture
quality
Repeat play—play a program
repeatedly
STANDARD
0:00.22
R1 SP 1
Manual tracking
Vertical locking adjustment
[Remember]
Press [VCR] first.