Filter
Top Products
VQT2T88
Speaker setting/Maintenance
3
The lightning fl ash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
suffi cient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Caution
• Use the speakers only with the recommended
system. Failure to do so can damage the
amplifier and speakers, and can cause fire.
Consult a qualified service person if damage
occurs or if a sudden change in performance
is apparent.
• Do not attach these speakers to walls or
ceilings.
Speaker setting
Make sure to make this setting when using for the first time after purchase.
Link the front speakers (SC-ZT2) wirelessly first and then
make the settings for the surround speakers.
Preparations
• Make sure that all equipment has been turned off.
(When the VIERA Link “HDAVI Control” compatible Panasonic
TV (VIERA) and Blu-ray Disc player/DVD recorder (DIGA) are
connected, do not turn on TV (VIERA) and Blu-ray Disc player/DVD
recorder (DIGA) until the setting is complete.)
• Connect AC power supply of main unit (SC-ZT2) and 4
speakers to household main sockets. (➜ page 12 of SC-ZT2
Operating Instructions and left page of this manual)
•
Make sure that the main unit (SC-ZT2) and speakers have been turned off.
• Prepare the remote control (SC-ZT2). (➜ page 7 of SC-ZT2
Operating Instructions)
1. Turn the main unit (SC-ZT2) on.
2. Turn on the front speakers (SC-ZT2).
• The color of the [WIRELESS LINK] indicator of the front speakers
changes from red to green.
• Do not turn on the surround speakers yet at this point. The color
of the [WIRELESS LINK] indicator does not change from red to
green even if the power is turned on.
3.
Set “4CH ” at the setting operation of “Changing the number of
speakers to 4”. (➜ page 15 of SC-ZT2 Operating Instructions)
4. Turn the main unit (SC-ZT2) off once.
5. Turn the main unit (SC-ZT2) on again.
• “4CH SEARCH ” appears on the display. (This is displayed only
at the first-time setting.)
6. Turn on the surround speakers.
• The color of the [WIRELESS LINK] indicator of the surround
speaker changes from red to green.
• When the [WIRELESS LINK] indicator of each speaker lights
green, “4CH SEARCH ” display disappears.
7.
Press and hold [CH] on the remote control (SC-ZT2) about 3 seconds
until “4 SPKR SET ” is displayed on the main unit’s display.
• Always aim the remote control at the main unit for operation.
8. Press the remote control (SC-ZT2) button corresponding to
the speaker outputting the confi rmation sound.
Front speaker (left) : [GAME]
Front speaker (right) : [MUTE]
Surround speaker (left) : [–SETUP, OFF]
Surround speaker (right) : [
RETURN]
• Sound is output from any of the speakers.
• When you press the button corresponding to the confirmation
sound of a speaker, another speaker outputs a confirmation
sound. Press the corresponding button in the same way and
complete settings for all 4 speakers.
• When “COMPLETE ” disappears on the main unit’s display, the
speaker setting is complete.
Note
• Check if the speakers are properly set after setting the speakers.
(➜ page 14 of SC-ZT2 Operating Instructions)
• If the speakers are set incorrectly in step 8, turn the main unit
(SC-ZT2) off then on again and perform steps 7 and 8.
•
If the [WIRELESS LINK] indicator does not change from red to green,
see page 27 of SC-ZT2 Operating Instructions, “Troubleshooting guide”.
Corresponding buttons
(➜ page 15 of SC-ZT2
Operating Instructions)
Speaker (➜ left page)
Maintenance
Unplug the AC power supply cord from the household AC outlet and
wipe the system using a soft and dry cloth.
• When the system is very dirty, wring the cloth soaked in water
thoroughly, wipe the dirt and wipe moisture off with a dry cloth.
• Do not use solvents such as benzine, thinner, alcohol, etc. because
they may cause casing to deform and coating to come off.
• Before using chemically treated cloth, read the instructions that
come with the cloth carefully.
•
When you turn the main unit (SC-ZT2) off with the speakers on,
the speakers automatically enter Standby (Wireless Link Standby).
The color of the [WIRELESS LINK] indicator turns to red.
•
To reduce more of the power consumption of speakers in Standby, turn
the speakers off. The speakers enter Standby (In Standby condition).
<Power consumption of speakers in Standby>
Wireless Link Standby: approx. 0.8 W (per 1 speaker)
In Standby condition: approx. 0.1 W (per 1 speaker)
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A
BOOKCASE, BUILT-IN CABINET OR IN ANOTHER
CONFINED SPACE. ENSURE THE UNIT IS WELL
VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK
OR FIRE HAZARD DUE TO OVERHEATING, ENSURE
THAT CURTAINS AND ANY OTHER MATERIALS DO
NOT OBSTRUCT THE VENTILATION VENTS.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE,
*
DO NOT EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING AND THAT NO
OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,
SHALL BE PLACED ON THE APPARATUS.
*
USE ONLY THE RECOMMENDED ACCESSORIES.
*
DO NOT REMOVE THE COVER (OR BACK); THERE
ARE NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The unit should be installed near an accessible AC power outlet,
with the power cord connected directly to it.
To completely disconnect power from the unit, unplug the power
cord from the AC power outlet.
CAUTION!
Do not place anything on top of this unit or block the heat radiation
vents in any way. In particular, do not place DVD recorder or CD/
DVD players on this unit as heat radiated from it can damage your
software.
5$<6228366A'PAKPFF5$<6228366A'PAKPFF