Filter
Top Products
6
RQT9708
Attaching the unit to a wall
(optional)
∫ Supplied accessories
≥ 1 Safety holder
≥ 1 Screw
≥ 2 Wall mount brackets
∫ Commercially available accessories
(not supplied)
≥ 4 Wall mount bracket fixing screws
≥ 1 Safety holder fixing screw
≥ 1 Fall prevention cord
≥ 1 Screw eye
Use screws with a nominal diameter of ‰4 mm (
5
/32q), which are
suitable to the material of the wall (e.g., wood, steel, concrete,
etc.)
1 Detach the stand from the unit.
{. Unscrew the fixing screw (2 pieces) at the bottom of the
unit.
{. Gently pull the stand off the unit as illustrated.
≥ Keep the removed screws and stand in a safe place.
2 Measure and mark the position of the wall
mount brackets (Both sides).
{. Use figures below to identify the screwing positions.
The position to attach the wall mount brackets
Space required
Installation accessories
≥ Keep the safety holder out of reach of children to
prevent swallowing.
≥ Keep the screws out of reach of children to prevent
swallowing.
≥ Keep the wall mount brackets out of reach of children
to prevent swallowing.
Safety precautions
Professional installation is required.
The installation should never be done by any
other than a qualified installation specialist.
PANASONIC DISCLAIMS ANY PROPERTY
DAMAGE AND/OR SERIOUS INJURY,
INCLUDING DEATH RESULTING FROM
IMPROPER INSTALLATION OR INCORRECT
HANDLING.
≥ Be sure to install this unit as indicated
within this Owner’s Manual.
Wall mount instructions
Before installation, turn the unit off and disconnect the
AC power supply cord from the AC outlet.
Before deciding the location to place the unit, be sure
to check that the Wi-Fi signal strength is sufficient.
(> 9, 15)
Bottom of main unit
Stand
Soft blanket or cloth
Fixing screw
232 mm (9
1
/8q)
12.5 mm (
1
/2q)
300 mm (11
13
/16q)
247 mm (9
23
/32q)
680 mm (30
23
/32q)
65 mm
(2
9
/18q)
232 mm (9
1
/8q)
116 mm (4
9
/16q)
118 mm
(4
21
/32q)
480 mm (19q)
113 mm
(4
13
/32q)
15 mm
(
19
/32q)
SC-HC57~RQT9708.book 6 ページ ２０１２年３月２日 金曜日 午後２時４分