Panasonic SC-PM53 Stereo System User Manual


 
RQTV0097
8
Discs (continued)
Checking which discs are in the trays (CD CHECK)Checking which discs are in the trays (CD CHECK)
CD
MP3
WMA
1
Press [CD CHECK].
2
3
4
5
1
CD CHECK
2
Press the button again to close the trays.
Note
The tray with a disc being played will not open.
If the player is stopped, all trays will open.
Do not remove or insert discs during disc check.
Do not pull out the trays during disc check.
8 cm discs cannot be checked.
Display functionDisplay function
This function allows you to display the information of the
current track.
Press [DISPLAY] repeatedly during play or pause mode.
CD
Elapsed time Remaining time
MP3
WMA
Elapsed time
Remaining
time
Album name Track name
Tag (Artist) Tag (Track) Tag (Album)
Note
Maximum number of displayable characters: approximately 30
• This unit supports ver. 1.0 & 1.1 ID3 tags. Text data that is not
supported will not be displayed.
• ID3 is a tag embedded in MP3 tracks to provide information about
the track.
Advanced playAdvanced play
Direct access playDirect access play
This function allows you to start play from a speci c track.
CD
Press the numeric buttons to select and play your
desired track.
MP3
WMA
1
Press [ALBUM or ] to select the album.
2
Press [3/FF/¢] once and then the numeric buttons
to select and play your desired track.
For two-digit track, press [
h
10] once, and then the two
digits.
For three-digit track, press [h10] twice, and then the three
digits.
Note
This function does not work during any random/program mode.
Repeat playRepeat play
You can repeat program play or other selected play mode.
CD
MP3
WMA
Press [REPEAT] before or during play.
“REPEAT ON” and “ ” are displayed.
To cancel
Press [REPEAT] again.
“REPEAT OFF” is displayed and “
” is cleared.
Program playProgram play
This function allows you to program up to 24 tracks.
CD
1
Press [CD 6] and then [STOP 7].
2
Press [PROGRAM].
3
Press [DISC].
4
(Within 10 seconds or so)
Press [1~5] to select your desired disc.
5
Press the numeric buttons to select your desired
track.
6
Repeat steps 3 to 5 to program other tracks.
7
Press [CD 6] to start play.
MP3
WMA
1
Press [CD 6] and then [STOP 7].
2
Press [DISC].
3
(Within 10 seconds or so)
Press [1~5] to select your desired disc.
4
Press [STOP 7].
5
Press [PROGRAM].
6
Press [ALBUM or ] to select your desired
album.
7
Press [3/FF/¢] once and then the numeric buttons
to select your desired track.
8
Press [ENTER].
Repeat steps 6 to 8 to program other tracks.
9
Press [CD 6] to start play.
To Action
cancel program mode Press [PROGRAM] in the stop mode.
replay the program Press [PROGRAM] then [CD 6].
check program
contents
Press [ /REW/4] or [ /FF/¢] when
“PGM” is displayed in the stop mode.
To check while programming, press
[PROGRAM] twice after “PGM” appears,
then press
[ /REW/4] or [ /FF/¢] .
add to the program
CD
Repeat step 3 to 5 in the stop mode.
MP3
WMA
Repeat steps 6 to 8 in the stop mode.
clear the last track Press [DEL] in the stop mode.
clear all programmed
tracks
Press [CLEAR] in the stop mode. “CLR ALL”
is displayed.
Note
• When you try to program more than 24 tracks “PGM FULL”
appears.
• During program play, skipping is always in the programmed order,
whether forward or backward.
You cannot program CD-DA together with MP3 and WMA tracks.
You cannot change or open other trays during program play mode.
CD
During program play, you can search backward or forward only
within the current track.
MP3
WMA
The program memory is cleared when you change a disc or open
a disc tray.
RQTV0097_2P_EN.indd 8RQTV0097_2P_EN.indd 8 2/6/06 3:34:43 PM2/6/06 3:34:43 PM