Filter
Top Products
25
RQT6835
Disc operations
[Audio\menu]
[Display\menu]
[Picture\menu] [RAM] [DVD-A] [DVD-V] [VCD]
To change the user mode
1 Select User mode and press [1] to highlight the
number.
2Press [3, 4] to select “1” or “2”.
U1: MPEG D.N.R. (Digital Noise Reduction)
U2
1
Re-master (➡ page 29)
[RAM] [DVD-A] [DVD-V] [CD] [WMA] [MP3]
2
Dialogue Enhancer on/off [DVD-V]
(Discs where the dialogue is recorded in the center
channel)
This makes the dialogue in movies easier to hear.
1
4:3 Aspect
[RAM] [DVD-A] [DVD-V] [VCD]
Select how to show images made for 4:3 aspect screens on
a 16:9 aspect television.
≥Normal: laterally stretches images made for a 4:3
screen.
≥Auto: expands suitable 4:3 letterbox images to fill more
of the screen. Other images appear in full in the center of
the screen.
≥Shrink: images appear in the center of the screen.
≥Zoom: expands all images to fill the screen.
If your television has a similar feature, use it instead for a
better effect.
2
Zoom (➡ page 18)
[RAM] [DVD-A] [DVD-V] [VCD]
[ENTER]
;
[2, 1]
;
[ENTER]
Making fine adjustments to the zoom ratio
3
Subtitle position/Subtitle brightness [DVD-A] [DVD-V]
≥Position (0 to j60): in 2 unit steps
≥Brightness (Auto
§
/0 to j9)
§
The brightness adjusts automatically against the
background.
4
Bitrate display on/off [RAM] [DVD-A] [DVD-V] [VCD]
5
OSD brightness (j3 to i3)
Adjust the brightness of the on-screen displays.
1
2
OFF
OFF/48kHz
2345
0
x1.00
1
Normal
0 0
OFF
9.438 Mbps
Bit rate
Cur. 7.507 Mbps
Ave. 6.730 Mbps
5.0
Mbps
[2, 1]
During play: shows the bitrate (approximate values) of the
video being played
While paused: shows the data volume of the frame and
type of picture (➡ page 38, Glossary—I/P/
B)
A record of bitrates for
a sampling period.
Current
bitrate
Average bitrate
1
Picture mode
≥N: Normal mode
≥S: Soft mode (Soft picture with fewer video artifacts)
≥F: Fine mode (Details are sharper)
≥C1: Mellows images and enhances detail in dark scenes
≥C2: Sharpens images and enhances detail in dark
scenes
≥U1/U2: User mode (➡ below)
2
Depth Enhancer (0 to i4)
Reduces the rough noise in the background to give a
greater feeling of depth.
3
3D-NR (0 to i4)/Dot NR (On)
Reduces overall noise/Reduces the dot noise that occurs at
the borders between colors.
4
Block NR (0 to i3)
Smoothes block noise.
5
Mosquito NR (0 to i3)
Reduces the smudging that appears around contrasting
sections of the picture.
6
Contrast (j7 to i7)
Increases the contrast between light and dark parts of the
picture.
7
Brightness (0 to i15)
Brightens the picture.
8
Sharpness (j7 to i7)
Adjusts the sharpness of the edges of the horizontal lines.
9
Color (j7 to i7)
Adjust the shade of the picture’s color.
:
Gamma (0 to i5)
Emphasis of outlines.
1
N
U 1
13245
U 1
0
00
0
1
6
7
:
9
U2
000
0
0
8