Filter
Top Products
Timer operations
RQT6734
Reference
11
Setting the time
Remote control only
This is a 12-hour clock.
1 Press [
ff
ff
f] to turn the unit on.
2 Press [CLOCK/TIMER ADJ] to select “CLOCK”.
3 Within 10 seconds
Press [
gg
gg
g/∂] or [µ/
ff
ff
f] to set the time.
Press and hold to change the time faster.
4 Press [CLOCK/TIMER ADJ].
The time is set and the original display is restored.
To switch to clock display
Press [DISPLAY].
Every time you press the button:
Clock display ↔ Current display
Displaying the clock when the unit is ON:
Press [CLOCK/TIMER ADJ].
The clock is shown for about 10 seconds.
Note
The clock is accurate to within ±60 seconds a month.
Readjust if necessary.
Sound quality
Remote control only
You can create a three-dimensional sound field when listening to stereo
sound.
Press [LIVE VIRTUALIZER].
Press again to cancel.
Note
The actual effect depends on the source played.
EQ
AUX
AUX
TUNER/BAND
TUNER/BAND
TUNING MODE
TUNING MODE
EQ
EQ
LIVE VIRTUALIZER
LIVE VIRTUALIZER
PLAY MODE
PLAY MODE
VOLUME
DISP
DISP
LAY
AY
SLEEP
SLEEP
PGM/
PGM/
–CLEAR
CLEAR
CD
CD
CL
CL
OCK
CK
TIMER ADJ
TIMER ADJ
TIMER
TIMER
ON/OFF
ON/OFF
LIVE
VIRTUALIZER
AUX
AUX
TUNER/BAND
TUNER/BAND
TUNING MODE
TUNING MODE
EQ
EQ
LIVE VIRTUALIZER
LIVE VIRTUALIZER
PLAY MODE
PLAY MODE
VOLUME
VOLUME
DISP
DISP
LAY
AY
SLEEP
SLEEP
PGM/
PGM/
–CLEAR
CLEAR
CD
CD
CL
CL
OCK
CK
TIMER ADJ
TIMER ADJ
TIMER
TIMER
ON/OFF
ON/OFF
2 4
3
1
Using headphones (not included)
Reduce the volume level and connect the headphones to the
[PHONES] jack.
Plug type: 3.5
mm (
1
/8˝) stereo
Note
Avoid listening for prolonged periods of time to prevent hearing damage.
PHONES
External unit connections
•
An analog player with a built-in phono equalizer can be connected.
•
For details, refer to the instruction manual of the units which are to
be connected.
•
When units other than those described above are to be connected,
please consult your audio dealer.
Analog player
(not included)
AUX
Using the built-in sound quality
You can choose one of four types of sound quality.
D.BASS: Adds punch to rock
CLEAR: Clarifies higher sounds
SOFT: For background music
VOCAL: Adds gloss to vocal
Remote control only
Press [EQ] to select a setting.
Every time you press the button:
3-D sound with the Live Virtualizer
Using an external unit
(See above for external unit connection)
1. Press [AUX].
The unit comes on.
2. Start playback from the external source. (For details, refer to the
external unit’s instruction manual.)
Listening to an external source
AUX
Using an external unit
You can boost up the “AUX” output level.
Press and hold [AUX].
Every time you press and hold the button:
NORMAL ↔ HIGH
NORMAL: Normal output signal level
(Use when external source’s signal level is normal).
HIGH: To boost up to a higher output signal level
(Use when external source’s signal level is low, for example
portable CD/MD player).
11-12 SC-SC-EN5 P [En] 2/26/03, 2:00 PM11