Filter
Top Products
RQT6734
Cassette deck operations
10
The radio: manual tuning
Manual pre-setting
Remote control only
Pre-set the stations one at a time.
1 Press [PGM/–CLEAR] then press [g/
∂∂
∂∂
∂] or [
µµ
µµ
µ/f]
to tune to the required station.
2 Press [PGM/–CLEAR] then press [g/
∂∂
∂∂
∂] or [
µµ
µµ
µ/f]
to select a channel.
3 Press [PGM/–CLEAR].
The station occupying a channel is erased if another station is preset
in that channel.
Selecting channels
1 Press [TUNING MODE] to select “PRESET”.
2 Press [g/
∂∂
∂∂
∂] or [
µµ
µµ
µ/f] to select the channel.
3 Adjust the volume.
The radio: preset tuning
Up to 12 stations each can be set in the FM and AM bands.
Preparation:
Press [TUNER/BAND] to select “FM” or “AM”.
1 Press [TUNER/BAND] to select “FM” or “AM”.
The unit comes on.
Every time you press the button:
FM ↔ AM
2 Press [TUNING MODE] to select “MANUAL”.
Every time you press the button:
MANUAL ↔ PRESET
3 Press [g/
∂∂
∂∂
∂] or [
µµ
µµ
µ/f] to select the frequency of
the required station.
4 Adjust the volume.
Auto tuning
Press and hold [g/∂] or [µ/f] for a moment until the frquency
starts changing rapidly. The unit begins auto tuning, stopping when it
finds a station.
•
Auto tuning may not function when there is excessive interference.
•
To cancel auto tuning, press [g/∂] or [µ/f] once again.
To improve reception
Extend the whip antenna and adjust its direction.
If noise is excessive in FM
Remote control only
Press [PLAY MODE] to display “MONO”.
This mode improves sound quality if reception is weak, but broadcasts
will be heard in monaural.
Press [PLAY MODE] again to cancel the mode.
“MONO” goes out. MONO is also cancelled if the frequency is changed.
Turn off “MONO” for normal listening. Stereo and monaural broad-
casts are automatically played as they are received.
FM allocation setting
Main unit only
By adjusting the allocation, you can enable this tuner to receive FM
broadcasts allocated in 0.1 MHz steps.
Preparation:
Press [TUNER/BAND] to select “AM”.
Press and hold [TUNER/BAND]. After a few seconds, the display will
change to a flashing display of the current minimum FM frequency. If
you continue to hold the button down, the minimum frequency will
change. Release the button at this time.
To return to the original frequency indication, repeat above.
Note
•
After changing the “allocation” setting, the frequencies you previously
preset in the memory will be cleared.
AUX
AUX
TUNER/BAND
TUNER/BAND
TUNING MODE
TUNING MODE
EQ
EQ
LIVE VIRTUALIZER
LIVE VIRTUALIZER
PLAY MODE
PLAY MODE
VOLUME
VOLUME
DISP
DISP
LAY
AY
SLEEP
SLEEP
PGM/
PGM/
–CLEAR
CLEAR
CD
CD
CL
CL
OCK
CK
TIMER ADJ
TIMER ADJ
TIMER
TIMER
ON/OFF
ON/OFF
2
4
1
3
PLAY MODE
PGM/–CLEAR
AUX
AUX
TUNER/BAND
TUNER/BAND
TUNING MODE
TUNING MODE
EQ
EQ
LIVE VIRTUALIZER
LIVE VIRTUALIZER
PLAY MODE
PLAY MODE
VOLUME
VOLUME
DISP
DISP
LAY
AY
SLEEP
SLEEP
PGM/
PGM/
–CLEAR
CLEAR
CD
CD
CL
CL
OCK
CK
TIMER ADJ
TIMER ADJ
TIMER
TIMER
ON/OFF
ON/OFF
g/∂, µ/f
2
3
1
08-10 SC-SC-EN5 P [En] 1/15/03, 9:48 AM10