Filter
Top Products
25
RQT6243
Timer and other operations
Using the timers
Using the play/record timer
To change the timer
Press [rPLAY/REC] to select the desired timer.
Every time the button is pressed the setting changes as follows.
To check settings
While the unit is on and the “rPLAY” (or “rREC”) indicator is on,
press [CLOCK/TIMER] so “rPLAY” (or “rREC”) appears on the
display.
Two seconds after “rPLAY” (or “rREC”) appear, the settings are
displayed in the following order:
•
For play timer
•
For record timer
1 Play start time 1 Recording start time
2 Play finish time 2 Recording finish time
3 Play source 3 Recording source
4 Playback volume
You can check the settings even when the system is OFF by pressing
[CLOCK/TIMER] twice.
To enjoy the desired source after the timer setting is completed
The volume level (for play timer) and music source are stored in the
timer memory and the timer will start in these preset conditions.
However, the Disc numbers do not get stored in the timer memory.
1. After step 4, start playing the desired source.
2. Reset the Disc numbers if you have changed any of them, confirm
that a Disc or cassette is inserted, then press [f] to put the unit on
standby.
Note
•
If you switch the system to the standby mode while the play/record
timer is functioning, the OFF time setting will not be activated.
•
If AUX or DIGITAL input is selected as the source, when the timer
comes on, the system turns on and engages AUX or DIGITAL
input as the source. If you want to playback or record from a
connected unit, set the other unit’s timer to the same time. (See
the other unit’s instruction manual.)
REC
PLAY
(Off)
CLOCK/TIMER
TEST
EST
CH SELECT
CH SELECT
CH
H
LE VE
VE
L
SUBWOOFER
SUBWOOFER
78
9
0
DIS
DIS
PL AY
AY
DI
DI
MME
ME
R
PL AY
AY
MO DE
PROGRA M
45
6
10
MU
MU
TINGPRESET
T
EQ
CL
CL
OCK
CK
TIMER
TIMER
PLAY
REC
REC
SLEEP
SLEEP
AUTO OFF
TO OFF
DISC
12
3
TUNER
UNER
CD
S.SOUND EQ
S.SOUND EQ
VOLUME
VOLUME
TAPE
PE
DE
DE
LAY
AY
PL
AUX
AUX
DIGITAL-IN
DIGITAL-IN
REW
FF