Filter
Top Products
17
RQT6208
Specifications
(IHF’78)
■ AMPLIFIER SECTION
Rated minimum sine wave RMS power output
40 Hz–20 kHz both channels driven
0.9 % total harmonic distortion 100 W per channel (6 Ω)
1 kHz continuous power output both channels driven
0.05 % total harmonic distortion 105 W per channel (6 Ω)
Total harmonic distortion
rated power at 40 Hz–20 kHz 0.9 % (6 Ω)
half power at 1 kHz 0.07 % (6 Ω)
Power output at 1kHz each channel driven
0.9 % total harmonic distortion
Front (L, R) 100 W (6 Ω)
Center 100 W (6 Ω)
Surround (L, R, BACK) 100 W (6 Ω)
Low frequency damping factor 30 (6 Ω)
Load impedance
Front (L, R)
A or B 4–8 Ω
A and B 8 Ω
Center 6–8 Ω
Surround (L, R, BACK) 6–8 Ω
Dynamic headroom 2 dB (6 Ω)
Frequency response
PHONO RIAA standard curve ±0.8 dB
CD, TAPE, DVD, TV, VCR 1/VCR 2 10 Hz–70 kHz, ±3 dB
Input sensitivity
PHONO 0.4 mV (3 mV, IHF ’66)
CD, TAPE, DVD, TV, VCR 1/VCR 2 27 mV (200 mV, IHF ’66)
S/N (IHF A)
PHONO 70 dB (80 dB, IHF ’66)
CD, TAPE, DVD, TV, VCR 1/VCR 2 75 dB (85 dB, IHF ’66)
DVD 6CH 100 dB (IHF A, Rated Power, S=2V)
85 dB (94 dB, IHF ’66)
Input impedance
PHONO 47 kΩ
CD, TAPE, DVD, TV, VCR 1/VCR 2 22 kΩ
Tone controls
BASS 50 Hz, +10 to –10 dB
TREBLE 20 kHz, +10 to –10 dB
Subwoofer frequency response (–6 dB) 7–200 Hz
Digital input
Optical 3
Coaxial 1
Digital output
Optical 1
■ FM TUNER SECTION
Frequency range 87.9–107.9 MHz
Sensitivity 11.2 dBf (2 µV, IHF ’58)
50 dB quieting sensitivity
MONO 18.3 dBf (4.5 µV, IHF ’58)
STEREO 38.3 dBf (45 µV, IHF ’58)
Total harmonic distortion
MONO 0.2 %
STEREO 0.3 %
S/N
MONO 73 dB
STEREO 67 dB
Frequency response 20 Hz–15 kHz, +1 dB, –2 dB
Alternate channel selectivity 65 dB
Capture ratio 1.5 dB
Image rejection at 98 MHz 40 dB
Spurious response rejection at 98 MHz 75 dB
AM suppression 50 dB
Stereo separation
1 kHz 40 dB
10 kHz 30 dB
Antenna terminal 75 Ω (unbalanced)
■ AM TUNER SECTION
Frequency range 530–1710 kHz
Sensitivity 20 µV, 330 µV/m
Selectivity 55 dB
IF rejection at 1000 kHz 50 dB
■ VIDEO SECTION
Output voltage at 1 V input (unbalanced) 1±0.1 Vp-p
Maximum input voltage 1.5 Vp-p
Input/output impedance 75 Ω
■ GENERAL
Power supply AC 120 V, 60 Hz
Power consumption 450 VA, 350 W
Dimensions (W x H x D) 430 x 158 x 370 mm
(16-15/16'' x 6-7/32'' x 14-19/32'')
Mass 10.5 kg (23.1 lb.)
Power consumption in standby mode: 1 W
Notes:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
Step 1
Step 2
Step 3
Step 4
Before use
Others
Reference
To clean this unit, wipe with a soft, dry cloth.
¡Never use alcohol, paint thinner or benzine to clean this unit.
¡Before using chemically treated cloth, read the instructions that
came with the cloth carefully.
If the surfaces are dirty
Maintenance
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are trademarks of
Dolby Laboratories.
Manufactured under license from Digital Theater Systems, Inc.
US Pat. No. 5,451,942, 5,956,674, 5,974,380, 5,978,762 and
other world-wide patents issued and pending.
“DTS”, “DTS-ES Extended Surround” and “Neo:6” are
trademarks of Digital Theater Systems, Inc. Copyright 1996,
2000 Digital Theater Systems, Inc. All rights reserved.