Filter
Top Products
13
RQT6208
UP
TAPE
(MONITOR)
TV DVD
INPUT
CD TUNER PHONO
VCR1/VCR2
VOLUME
INPUT SELECTOR
DVD 6CH INPUTSUBWOOFERTAPE MONITOR
BASS/TREBLE
34
BALANCE L R
DIGITAL INPUT
VIDEO IN
VCR2
L AUDIO IN R
VCR1
l
VCR2
k
Volume control [VOLUME]
Input selector [INPUT SELECTOR]
Digital/analog input select button/indicator
[DIGITAL INPUT]
For switching between analog and digital input when you have
selected TV, CD, or DVD. The button lights when digital is selected.
Subwoofer level button [SUBWOOFER]
Adjust the level in 5 steps
SW MIN, SW 5, SW 10, SW 15, and SW MAX.
Select SW --- to stop output.
DVD 6ch/2ch input select button/indicator
[DVD 6CH INPUT]
For switching between 6-channel and 2-channel DVD input.
The button lights up when DVD 6CH INPUT is selected.
Tape monitor button [TAPE MONITOR]
For monitoring sound when recording to a 3 head cassette deck.
Also used when you have connected a graphic equalizer to the TAPE
terminals.
Tone/balance adjust buttons
[BASS/TREBLE, BALANCE, –, +, L, R]
For adjusting the tone and balance.
First select BASS, TREBLE, or BALANCE, then press [–, L] or [+, R]
to adjust.
For your reference
¡When playing videotapes
The picture remains on the screen even if you select TAPE,
CD, TUNER or PHONO.
¡Once you have set a mode (DSP, digital/analog input, or
2-channel/6-channel input) for an input source
That mode is engaged whenever you reselect the input source.
¡When DVD 6CH INPUT is on
Speaker settings are ineffective. Change the settings on the
DVD player if necessary.
¡When input is DIGITAL
The tape monitor cannot be used.
¡When using a graphic equalizer
Some distortion may occur, depending on the equalizer’s
settings.
¡To adjust the tone
The STEREO DSP mode must be on and input must be either
analog or PCM signals. You cannot adjust the tone while the
DSP is defeated or if DVD 6CH INPUT is selected.
¡When using the subwoofer
You cannot adjust subwoofer level while the DSP is defeated
or if DVD 6CH INPUT is selected.
Sound can be distorted if you raise the volume while subwoofer
level is high. Reduce subwoofer level if this occurs.
¡When SPEAKERS B is on
The STEREO DSP SOUND mode is engaged automatically.
¡When DTS FIX mode is on
You cannot use ENHANCED SURROUND and DTS-ES
signals will be played through 5.1 channels (i.e., there will be
no sound from the surround back speaker).
Step 1
Step 2
Step 3
Step 4
Before use
Others
Reference
VCR 2 terminals [VCR 2]
VCR 1/VCR 2 select button [VCR 1 l, VCR 2 k]
Input indicators [INPUT]
Program format indicators [L, C, R, S, SL, SB, SR, LFE]
Show the channels contained in the digital input signal. They do not light
when input is analog.
L: Front left channel
C: Center channel
R: Front right channel
S: If the surround channel is monaural.
SL: Surround left channel
SB: Surround back channel
SR: Surround right channel
LFE (Low Frequency Effect): Deep-bass effect.
Signal and decoding format indicators
[FIX, % PRO LOGIC
22
, PCM, NEO:6, , ES, % DIGITAL]
Light to indicate the source’s input signal and decoding format used.
% DIGITAL: Dolby Digital sources
: DTS sources
ES:DTS-ES sources
NEO:6:The DTS NEO:6 circuit is being used
% PRO LOGIC
22
: The Dolby Pro Logic 2 circuit is being used
FIX: PCM FIX or DTS FIX mode
PCM: PCM FIX mode