Filter
Top Products
11
Using Vehicle Battery Power
To power the recorder from your vehicle’s battery,
you need a DC adapter, such as Cat. No. 270-1562.
Cautions:
• You must use a DC adapter that supplies at least
3 volts DC power and delivers at least 400 mA.
Its center tip must be set to negative, and its bar-
rel plug must properly fit the recorder’s
DC 3V
jack. The recommended adapter meets these
specifications. Using an adapter that does not
meet these specifications could damage the
recorder.
• Be sure you plug the adapter into the cassette
recorder before you plug it into the cigarette-
lighter socket, and unplug the adapter from the
cigarette-lighter socket before you unplug it from
the cassette recorder.
14-1120.fm Page 11 Wednesday, January 19, 2000 4:27 PM