Filter
Top Products
E
N
G
L
I
S
H
14
CQ-DP151/DP101W
31
E
N
G
L
I
S
H
13
CQ-DP151/DP101W
30
Installation Guide (Continued)
Remove the removable face plate.
1 Press ['] (release button). The removable
face plate will be released.
2 Pull on the right side of the unit.
1
2
Remove the Unit
7 Trim plate
<
<
SOURCE
REP
RANDOM
PWR
Remove the trim plate 7 with a screwdriver.
Pull out the unit while pushing down the lock
lever with a screwdriver.
Remove the unit pulling with both hands.
1
Contact
Main unit
Lock lever
Screwdriver
Install Removable Face Plate
1 Slide the left side of the removable face plate in
place.
2 Press the right end of the removable face plate
until “click
” is heard.
Cautions:
≥This face plate is not water-proof. Do not expose it to water or excessive moisture.
≥Do not remove the face plate while driving your car.
≥Do not place the face plate on the dashboard or nearby areas where the temperature rises to high level.
≥Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical
contacts.
≥If dirt or other foreign substances get on the contacts, wipe them off with a clean and dry cloth.
≥Do not apply a strong downward force onto the face plate and do not put anything on it while it is open, or
it might be damaged.
2
1
<
Plastic tab
2
3
4
Switch off the power of the unit.
Lock lever
Cutout
Release button