Filter
Top Products
18
CQ-DFX202N
13
E
N
G
L
I
S
H
To Remove the Unit
q
Remove the removable face plate.
(a) Open the face plate.
(b) Push the face plate to either the right or left,
then pull it out toward you.
w
Remove the trim plate t with a screwdriver.
e
Pull out the unit while pushing down the lock
lever with a screwdriver.
r
Remove the unit pulling with both hands.
Installation (continued)
1
2
Cautions:
¡Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical contacts.
¡If dirt or other foreign substances get on the contacts, wipe them off with clean and dry cloth.
¡Do not apply a strong downward force onto the face plate and do not put anything on it while it is open, or it might be
damaged.
q Open
Contact
w Push
e Pull out
tTrim Plate
Screwdriver
Lock Lever
Screwdriver
OPEN
SOURCE
PTY
PWR
MONO/LOC
OPEN
Open