Filter
Top Products
CQ-4330U
29
Specifications
❐ General
Power Supply: 12 V DC (11 V-16 V) test Voltage 14.4 V, Negative ground
Current consumption: Less than 2.5 A (tape mode, 0.5 W 4-speaker)
Maximum Power Output: 37 W
× 4 channels at 400 Hz, Volume Control maximum
Tone adjustment range:
Bass: ± 12 dB at 100 Hz
Treble: ± 12 dB at 10 kHz
Power Output: 18 W per channel into 4 ohms, 40 to 30 000 Hz at 3 % THD
Suitable Speaker Impedance: 4-8 Ω
Dimensions (W
× H × D): 7" × 1-15/16" × 6-1/10" (178 × 50 × 160 mm)
Weight: 3 lbs. 12 oz (1.7k
)
❐ FM Stereo Radio
Frequency Range: 87.9-107.9 MHz
Useable Sensitivity: 12 dBf. (1.1 µV/ 75 Ω, S/N 30 dB)
50 dB Quieting Sensitivity: 17 dBf. (1.8 µV/ 75 Ω)
Frequency Response: 30-15 000 Hz ±3 dB
Alternate Channel Selectivity: 75 dB
Stereo Separation: 35 dB at 1 kHz
Signal/Noise Ratio: 70 dB (Mono)
❐ AM Radio
Frequency range: 530 kHz–1 710 kHz
Usable sensitivity: 28 dB/µV (25 µV, S/N 20 dB)
❐ Weather Band Radio
Frequency Range: 162.40-162.55 MHz
Useable Sensitivity: 3 dB/µV (S/N 20 dB)
Signal/Noise Ratio (40 dB/µV): 50 dB
❐ Tape Player
Reproduction System: 4-track, 2-program stereo
Tape Speed: 1-7/8"/sec (4.76 cm/sec)
FF/REW Time: Less than 110 sec (C-60)
Frequency Response: 35-14 000 Hz ±3 dB
Wow and Flutter: 0.12 % (WRMS)
signal/Noise Ratio: 52 dB (Dolby NR on: 62 dB)
Above specifications comply with EIA standards.
Note: Specifications and design are subject to modification without notice due to improvements in technology.
Dobly noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol
A are trademarks of Dolby Laboratories Licensing Corporation.