Filter
Top Products
46
CQ-C9800/9700U
CQ-C9800/9700U
47
Audio Settings
(continued)
E
N
G
L
I
S
H
27
SQ Adjustment
(SQ ADJUSTMENT)
Center frequency and level are
adjustable in each of 9 bands. This lets
you fi ne tune sound quality for each
genre to suit car-interior acoustics and
your personal preferences.
Equalizer center frequency:
62.5 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz,
2 kHz, 4 kHz, 8 kHz, 16 kHz (default)
Setting range: j12 dB to i12 dB
(by 2 dB)
1 Press [%] or [$] to select a band.
[$]: Up
[%]: Down
2 Turn [VOLUME] to select a center frequency.
[VOLUME "]: Up
[VOLUME #]: Down
3 Press ["] or [#] to adjust the equalizer level.
["]: Up
[#]: Down
64
97
5
Car Audio
SOURCE
MUTE
POWER
RAND
VOL
312
DISPBAND
REP
6
5
SET
SEL
#
SCAN
MENU
NUMBER
8
0
[DISP]
(Display)
[VOL "]
[VOL #]
[2] to [6]
(SQ preset
buttons)
∫ To return an adjusted SQ to the default
setting
Press and hold [BAND] for more than 2 seconds
during SQ adjustment setting.
Note for SQ adjustment and preset memory:
≥ To call a preset SQ, refer to page 25.
≥ While the SQ adjustment mode is established,
only adjustments are performed, and even if the
adjustment mode is exited without presetting
an adjusted effect, what has been set will be
refl ected as the current SQ until another SQ is
selected.
≥ Even when the SQ presets are adjusted, the
display which appears when the settings are
called remains unchanged.
≥ Only buttons [2] to [6] can be used to
preset the adjusted SQ. An adjusted SQ
cannot be preset in button [1].
Note:
≥ Press [DISP] (display) to return to the regular
mode.
≥ If no operation takes place for more than
10 seconds in SQ adjustment and position
settings, the display returns to the regular
mode.
[BAND]
SQ Preset Memory
Setting (SQ PRESET MEMORY)
You have 6 preset modes (FLAT, POP,
ROCK, VOCAL, JAZZ, CLUB). You
can customize your settings for these
(except FLAT) and save them for instant
recall.
≥ Do not activate SQ and DC
(bass/treble) at the same time to
avoid causing sound distortion.