Filter
Top Products
38 (E)
CONTENTS
Setup menus
The underlined items indicates the initial setting.
USER menu
<OPERATION>
No./Item Description
111
FRZ MODE
SEL
This selects the output picture in the
STANDBY OFF (HALF LOADING) and EJECT
modes.
0000 DIS
:
The video output is muted.
0001 STB OFF
:
When the STANDBY OFF (HALF LOADING)
mode is established, the picture being played
back at the time is frozen and output.
0002 SOF&EJ
:
When the STANDBY OFF (HALF LOADING)
or EJECT mode is established, the picture
being played back at the time is frozen and
output.
<Notes>
OFreeze status complies with the setup menu
item No. 605 (FREEZE SEL) setting.
OIn the EJECT mode, freeze is output only when
BLACK, BLACK1, GRAY or GRAY1 is selected
as the setup menu item No. 105 (AUTO EE
SEL) setting.
112
V IN SEL INH
This selects whether video input switching
using the INPUT SELECT button is to be
enabled or disabled.
0000
OFF
:
Video input switching using the INPUT
SELECT button is enabled.
0001 ON
:
Video input switching using the INPUT
SELECT button is disabled.
0002 REC
:
Video input switching using the INPUT
SELECT button after the unit has been
transferred to a recording (but not editing)
mode is disabled.
113
A IN SEL INH
This selects whether audio input switching
using the INPUT SELECT button is to be
enabled or disabled.
0000 OFF
:
Audio input switching using the INPUT
SELECT button is enabled.
0001 ON
:
Audio input switching using the INPUT
SELECT button is disabled.
0002 REC
:
Audio input switching using the INPUT
SELECT button after the unit has been
transferred to a recording (but not editing)
mode is disabled.
<Note>
Even when the ON or REC setting is selected to
disable audio input switching using the INPUT
SELECT button, it is still possible to set the setup
menu items No. 715 (CH1 IN SEL), No. 716
(CH2 IN SEL), No. 717 (CH3 IN SEL), No. 718
(CH4 IN SEL), No. 719 (D IN SEL12) and No.
720 (D IN SEL34).
110
MEMORY
STOP
This selects whether the VTR is to stop
automatically when the counter value reaches
“0” during a fast forwarding or rewinding
operation in the CTL mode.
0000 OFF
: The VTR does not stop.
0001 ON
: The VTR stops automatically.
<Notes>
OThe stop mode concerned is either the stop or
the still-picture (SHTL STILL or SLOW STILL)
mode depending on the setup menu No. 315
(AFTER CUE-UP) setting.
OWhen both the AUTO REW function and
MEMORY function have been selected at the
same time, the AUTO REW function takes
precedence.
No./Item Description
1
2
3
4
Memory stop function
The MEMORY STOP function
does not work if it is activated
within a range of 0 ± 2 frames.
FF
button
Zero
point
FF
button
REW
button
REW
button
! When the FF button is pressed, the VTR performs the regular fast
forward operation since the zero point is not located in the
direction of operation.
@ When the REW button is pressed, the PREROLL lamp lights (the
SHTL lamp lights as well), the VTR proceeds with the preroll
operation, and it automatically stops when it reaches the position
where the counter reads “0.”
# When the REW button is pressed, the VTR performs the regular
rewinding operation since the zero point is not located in the
direction of operation.
$ When the FF button is pressed, the PREROLL lamp lights (the
SHTL lamp lights as well), the VTR proceeds with the preroll
operation, and it automatically stops when it reaches the position
where the counter reads “0.”
109
AUTO REW
This selects whether to rewind the tape
automatically to the tape start when the tape
end is detected.
0000 OFF
: The tape stops at the tape end.
0001 ON
: The tape is rewound to the tape
start.