Filter
Top Products
This function allows the tracks to be played in a programmed sequence.
Press the Program Button (#21) once. The CD Program Indicator (#27) will flash and the LED Track
Display (#20) will display "0" and blink.
Press the CD Skip Forward Button (#17) or CD Skip Backward Button (#16) to select the song to be
programmed.
Press the Program Button (#21) again to store selection. The CD Program Indicator (#27) will flash and
the LED Track Display (#20) will go to "0" and blink.
Press the CD Skip Forward Button (#17) or CD Skip Backward Button (#16) to select the next song to
be programmed and press the Program Button to store selection.
You may repeat steps #1- #4 to program as many as 19 tracks. If you attempt to program more than 19
tracks, the LED Track Display (#20) will display "--" instead.
To check the programmed tracks, press Program Button (#21). The LED Track Display (#20) will
display the track number. Press Program Button (#21) more times to check the following tracks.
Press CD Play Button (#23) to start playing in the programmed sequence.
To cancel programmed play, press the CD Stop Button (#22).
1.
2.
3.
4.
5.
Set the Function Selector (#1) to "RADIO" position.
Set the Band Selector (#6) to "AM" or "FM" for the desired radio band.
Adjust the Tuning Knob (#7) to select the desired radio station.
Adjust the Volume Control (#14) to obtain the desired sound level from the Dynamic Speakers (#15).
When you wish to turn off the Radio, set the Function Selector (#1) to the "TAPE" position.
1.
2.
To insure maximum FM tuner sensitivity, the Telescopic Antenna (#2) should be fully extended and
rotated to obtain the best possible reception. The FM Stereo Indicator (#28) will light steadily when a
stereo program is being received.
When tuning in AM reception, be sure to place the unit in a vertical position. To insure best AM
sensitivity, try repositioning the unit until the best reception is obtained.
1.
2.
3.
4.
5.
6.
Open the Cassette Door (#24) and insert a pre-recorded cassette tape with the exposed tape facing
upwards. Close the Cassette Door (#24).
Press the Cassette Play Button (#19) and adjust the Rotary Volume Control (#14) to obtain the desired
sound level.
Press Cassette Pause Button (#13) to suspend play. Press same button again to resume.
Press the Cassette Fast Forward Button (#11) or the Cassette Rewind Button (#10) to rapidly advance
or rewind the tape.
Press the Cassette Record Button (#8) to record from either Radio, Dynamic Built-in Condenser (#29)
or CD. Use Function Selector (#1) to choose your signal source accordingly.
Press the Cassette Stop Button (#12) to stop operation.
5
CD PROGRAMMED PLAY
1.
2.
3.
4.
5.
6.
7.
8.
RADIO RECEPTION
TIPS FOR GOOD RADIO RECEPTION
CASSETTE RECORDER OPERATION