Filter
Top Products
IMPORTANT: Be sure that the batteries are installed correctly. Wrong polarity may damage the unit.
A. BATTERY OPERATION
1
2
Remove the Battery Door (#32).
Following the polarity diagram as shown on the Battery Door (#32) insert 8 x "D" size (UM-1)
batteries (not included)
3.
4.
5.
6.
For better performance and longer operating time, we recommend the use of alkaline-type
batteries.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
If the unit is not to be used for an extended period of time, remove the batteries. Old or leaking
batteries can cause damage to the unit and may void the warranty.
B. AC OPERATION
When the AC power cord (included) is connected to the AC Power Socket (#31) at the back of the unit
and the other end to a wall outlet with AC 230V 50Hz power supply, the unit will disconnect the
batteries automatically, and operate on AC Power instead
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Set the Function Selector (#1) to the "CD" position and the LED Track Display (#20) will display "00"
Open the CD Door (#4) Carefully place an audio CD with its label side upward in the CD compartment
and close the CD Door (#4) by pressing on the CD Door where indicated (#5).
The total number of tracks on the CD will appear in the LED Track Display after a few seconds.
Press the CD Play Button (#23) The CD Play Indicator (#25) will light and the CD will start playing from
the first track.
Adjust the Volume Control (#14) to obtain the desired sound level from the Dynamic Speakers (#15).
To suspend playing, press the CD Pause Button (#23) and the CD Pause Indicator (#25) will flash. To
resume playing, press the Pause Button again.
You can choose to play your favourite track directly by pressing either the Skip Forward Button (#17) or
Skip Backward Button (#16). The LED Track Display (#20) will indicate the correct track number
selected.
To locate a particular passage within a track, keep the CD Search Forward Button (#17) or CD Search
Backward Button (#16) depressed until it is found.
To repeat a particular track, press the CD Repeat Button (#18) until the CD Repeat 1/All Indicator (#26)
flashes.
To repeat the entire CD, press the Repeat Button (#18) until the CD Repeat 1/All Indicator (#26) lights
steadily.
To stop playing, press the CD Stop Button (#22).
When you wish to turn off the CD Player, set the Function Selector (#1) to the "TAPE" position.
4
POWER SOURCE
CD PLAYER OPERATION