Page 12 For technical questions, please call 1-800-444-3353. SKU 68018
4. To re, open the shut-off valve, place
the Safety against the workpiece. The
Stapler should not re if the nose is not
depressed. Once depressed, gently and
briey squeeze the Trigger once. Do not
re repeatedly. Staples could bounce
off of one another, damaging the work
piece or causing PERSONAL INJURY.
5. Adjust position of the Air Deector (3) to
direct exhaust away from yourself.
6. If the tool requires more force to
accomplish the task, verify that the
tool receives sufcient, unobstructed
airow (CFM) and increase the pressure
(PSI) output of the regulator up to the
maximum air pressure rating of this tool.
CAUTION! TO PREVENT TOOL AND
ACCESSORY FAILURE, RESULTING
IN INJURY: Do not exceed the tool’s
maximum air pressure rating. If the
tool still does not have sufcient force at
maximum pressure and sufcient airow,
then a larger tool may be required.
7. After use, to prevent accidents:
a. Release the Trigger.
b. Detach the air supply.
c. Attempt to re the Tool into a piece
of scrap wood to ensure that it is
disconnected and is incapable of
ring any fasteners.
d. Release the Trigger again.
e. Clean external surfaces with clean,
dry cloth.
f. Store indoors out of children’s reach.