Filter
Top Products
9
LISTENING TO THE RADIO
1.) Press the POWER button on the main unit or the remote control. The main
display will light up with information.
2.) If necessary, press the TUNER button on the
front
panel of main unit or the
FUNCTION button on remote control to select the Tuner function. The display
will show an AM or FM station frequency. To select a different band, press the
STOP/BAND button.
3.) Tune to the desired frequency as follows:
Manual Tuning
Repeatedly press the or buttons until the frequency of the desired
station appears on the display.
• Automatic Tuning
Press and hold the or buttons until the display begins to move, then
release the buttons. The tuner will search for the next
available station and
stop on that station. Repeat this procedure until the tuner
stops on your desired station.
4.) Adjust the VOLUME and EQ controls as desired.
5.) If you have tuned to a FM Stereo station, the STEREO indicator will appear
in the
display.
6.) When you are finished listening, press the POWER button on the main unit or
remote control to return to the Standby (Power Off) mode.
AM