Oricom UHF2100 Radio User Manual


 
18
Operation
the repeater access for these specific Channels. When activated,
your radio will receive the Repeater on its specific channel (all
repeater outputs are on channel 1 to 8) but transmits to the
repeater channel 31 through 38. So, if you are in the range of a
local repeater which transmits on channel 2, after setting your radio
to allow access of the repeater on that channel, you will select
channel 2 as normal, but during transmit operation your radio will
automatically transmit to the repeater on channel 32.
Setting the Repeater function
a. Press the Menu button 13 times, “RPT” icon will be
displayed and flashing on the LCD screen.
b. Press the UP or DOWN button to set the Repeat function
to On or Off.
c. Press the PTT button to confirm your setting.