Oricom UHF2100 Radio User Manual


 
17
Operation
a. Press the MENU button 11 times, the “ON” icon is
flashing on the LCD Screen.
b. Press the UP or DOWN button to select Key tone On/Off.
c. Press the PTT button to confirm your setting.
Setting the Dual Watch Mode
Your radio is capable of monitoring two channels, the current and
another (dual watch) channel. If the unit detects a signal on either
channel, it will stop and receive the signal.
a. Press the MENU button 12 times, “DCM” icon will be
displayed while “OF ” flashes on the LCD Screen.
b. Press the UP or DOWN button to select the Dual Watch
channel (1-40, except the current channel).
c. Continue pressing the MENU button to change the
CTCSS code.
d. Press the UP or DOWN button to select the desired
CTCSS code (1-38)
e. Continue pressing the MENU button to change the DCS
code.
f. Press the UP or DOWN button to select the desired DCS
code (1-83)
g. Press the PTT button to confirm your setting.
Repeater function
Your radio has a Repeater Access function to allow use of
local Repeater stations (if available in your area). Repeaters
are shared radio system installed by interested parties (clubs,
local business etc.) that pick transmissions on specific
channels and re-transmit (or repeat) the received signal to
another channel.
The Repeater Access function can be set (from channel 1 to 8)
used by local repeater stations. For example, if there are 3 repeater
stations in your area (say, channel 1, 3 and 5) you only need to set