Optimus STAV-3690 Stereo Receiver User Manual


 
1
7
Basic Operation
Tuning the Radio
You can tune your receiver manually or you can store stations in memory.
Manual Tuning (Front Panel Only)
Follow these steps to manually tune to a station.
1. Press
TUNER
. Then press
FM/AM
to select the desired band.
When you select the AM or FM band, the receiver tunes to and displays
the frequency last selected in that band.
2. Press
SELECT
so
FREQ
appears on the
JOG MODE
display.
3. Turn
MULTI
JOG
to tune the desired station.
TUNED
appears when you
tune to a strong station.
Memory Tuning
Memory tuning lets you store up to 30 AM or FM frequencies in one of three dif
-
ferent classes (10 frequencies in each class), then you can instantly tune to a
stored station. The three classes let you group stations so there are fewer sta-
tions to search through to find the one you want.
Follow these steps to store a station in a memory location.
1. Press
TUNER
. Then press
FM/AM
to select the desired band.
2. Use manual tuning to select the frequency you want to store.
If desired, press
FM MONO
for FM stereo or monaural sound (see “Using
FM MONO” on Page 18). This setting is also stored in the memory.
3. Press
MEMORY
.
MEMORY
appears for 5 seconds.
4. While
MEMORY
is on the display, press
CLASS
so the class number you
want appears, turn
MULTI
JOG
to select the memory number you want,
then press
ENTER
to store the frequency in memory.
The frequency and class number flash, then light steadily.
To tune to a stored station, press
SELECT
so
ST
appears on the
JOG MODE
dis
-
play. Press
CLASS
to select the class number you want, then turn
MULTI
JOG
until
the desired frequency appears on the display. When you reach the last frequen
-
cy in a class, the receiver automatically moves to the next memory class.
You can also use
STATION
on the remote control to select a station in memo
-
ry. See “Using the Remote Control” on Page 23.
Notes:
If you store a frequency in a memory
that already contains a frequency, you
replace the previous frequency.
If your receiver is disconnected from
AC power for several days, it loses all
the stored frequencies.