Filter
Top Products
2
0
Cassette Deck/VCR Features
Playing and Recording
V
ideo Tapes
You can connect two video sources to the receiver. If you connect a VCR to the
VCR/TAPE 1
audio and video jacks, you can copy video cassette tapes from one
VCR to another and monitor the dubbing process.
Playing a Video Cassette Tape
To play a video tape, load the tape into the VCR connected to either
VCR/TAPE 1
or
LD/SAT
. Press the button (
VCR/TAPE 1
or
LD/SAT
) that corresponds to the jack
the VCR is connected to.
VCR
or
LD/SAT
appears on the display. Follow the
VCR’s instructions to begin playback. If you connected a monitor to the re-
ceiver’s
TO MONITOR TV
jack, you can view the program on that monitor.
Copying a Video Cassette Tape
Follow these steps to copy a video tape from one VCR to another.
1. Load the tape you want to copy into a VCR connected to
LD/SAT
.
2. Load a blank tape (or one you want to record over) into a VCR connected
to the
VCR/TAPE 1
jacks.
3. Press
LD/SAT
.
4. Begin recording and playback on the VCRs.
Important:
Most material performed in public, such as concerts, plays, and
movies, or distributed on prerecorded video tapes is copyrighted. The unautho-
rized recording or duplication of copyrighted material is a violation of the copy-
right laws of most countries and such duplication may result in fines,
imprisonment, or both. Note, however, that in the United States, it is not a viola-
tion of U.S. copyright laws for a consumer to record a broadcast television pro-
gram for private (in-home) viewing.