Optimus STAV3680 Stereo Receiver User Manual


 
2
Introducing the Optimus STAV-3680
Your Optimus STAV-3680 Audio/Video Receiver is the perfect control center for
your audio/video system. It combines 500 watts total Pro Logic Surround Sound
power with five equal-power discrete amplifiers and provides connections for
one tape deck, one VCR, two more tape decks or audio/video playback
sources, a turntable, a CD player, and a video monitor.
Your receiver also has special sound options.
Dolby Pro Logic
Surround Sound
delivers movie theater sound for audio/video programs (especially those en-
coded with Dolby Surround Sound signals).
Dolby 3CH Logic
provides a wider
sound field than ordinary playback.
Studio Effect
simulates the ambiance of a
recording studio, adding extra richness to your music.
5-D Theater
provides
clear dynamic sound effects by sending audio signals to the rear channel to
simulate stereo sounds.
Additional features include:
Digital-Synthesized Tuner
Precisely tunes to AM and FM stations.
Multi-Jog Tuning
Offers you a simple tuning method for either memorized stations or the entire
frequency range.
30 Memory Locations
Let you store and recall the frequencies for up to 30 AM/FM stations.
Subwoofer Output
Lets you easily connect an amplified subwoofer that delivers the very low fre-
quency bass sounds, bringing out the richness and depth of music plus the full
impact of motion-picture special effects for sound you can actually feel.
Tape Monitoring
Lets you listen to the actual recording as you record, if your tape deck has a
tape-monitoring feature.
Built-In Protection Circuits
Automatically turn off the receiver to help avoid power surges or short circuit
damage.
Remote Control
Lets you use a single remote control for the receiver and other compatible com-
ponents connected to the receiver.
Note:
The remote control requires two AA batteries (not supplied).
.
We recommend you record the receiver’s serial number here. The serial number is on
the receiver’s back panel.
Serial Number:_____________________________________________
Note to the Cable TV System Installer:
This reminder is provided to call the CATV system installer’s attention to article 820-40 of the National Electrical Code that
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the ground-
ing system of the building as close to the point of cable entry as practical.
Manufactured under license from Dolby Laboratories Licensing Corporation.
Dolby, Pro Logic, and the double-D symbol ( ) are trademarks of Dolby Laboratories Licensing Corporation.
1997 Tandy Corporation.
All Rights Reserved.
RadioShack and Optimus are registered trademarks used by Tandy Corporation.