Filter
Top Products
7
Preparing Your Receiver
Connecting the A and B Speakers
Follow these steps to connect the right speaker to the receiver’s right
FRONT
SPEAKERS A
terminals.
1. Lift the receiver’s
FRONT SPEAKERS A R
(+) red lever and insert the ridged
or color-coded conductor’s end into the small hole. Pull back the lever to
secure the conductor.
2. Lift the receiver’s
FRONT SPEAKERS A R
(
–
) black lever and insert the other
conductor’s end into the small hole. Pull back the lever to secure the con
-
ductor.
3. Connect the ridged or color-coded conductor’s loose end to the right
speaker’s positive (+) terminal.
4. Connect the remaining loose conductor to the right speaker’s negative (–)
terminal.
Repeat Steps 1 through 4 to connect the left speaker to the receiver’s left
FRONT
SPEAKERS A
terminals.
Repeat this entire process to connect a second pair of speakers to the
FRONT
SPEAKERS B
terminals.
Note:
Be sure you connect the re-
ceiver’s right and left positive (+) and
negative (–) terminals to the speaker’s
corresponding right and left positive (+)
and negative (–) terminals.
A
B
A
B
R
L
R L
FRONT SPEAKERS
L
R
PRE OUT
SUB
WOOFER
CENTER
SPEAKER
REAR
SPEAKERS
L
R
AUDIO
IN
PRE OUT
CENTER
AUDIO
IN
Center Speaker
LeftRight
Surround
Speakers
Subwoofer
Amplified
Center Channel
Power Amplifier
Right Front A Speakers Left
Right Front B Speakers Left