Filter
Top Products
7
Preparing Your Receiver
Connecting the A and B Speakers
Follow these steps to connect the right speaker to the receiver’s right
A SPEAK
-
ERS
terminals.
1. Press the receiver’s
A SPEAKERS R
(+) red lever and insert the ridged or
color-coded conductor’s end into the small hole. Pull back the lever to
secure the conductor.
2. Press the receiver’s
A SPEAKERS R
(
–
) black lever and insert the other
conductor’s end into the small hole. Pull back the lever to secure the con
-
ductor.
3. Connect the ridged or color-coded conductor’s loose end to the right
speaker’s positive (+) terminal.
4. Connect the remaining loose conductor to the right speaker’s negative (–)
terminal.
Repeat Steps 1 through 4 to connect the left speaker to the receiver’s
A SPEAK
-
ERS L
terminals.
Repeat this entire process to connect a second pair of speakers to the
B
SPEAKERS
terminals.
Notes:
• Be sure you connect the receiver’s
right and left positive (+) and negative
(–) terminals to the speaker’s corre-
sponding right and left positive (+) and
negative (–) terminals.
• Fully insert the speaker wires to
ensure a good connection. Leave
extra wire at the back of the receiver
so you do not disconnect the wires
when you move the receiver.
Caution:
To prevent a short circuit, twist
the end of each conductor to be sure
that stray speaker wire strands do not
touch other speaker terminals or any
other receiver terminals.
SPEAKERS
A
B
L
R
A
B
Left
Left
B
Speakers
A
S
p
eakers
L
R