Filter
Top Products
6
2. Place the batteries in the compartment as indi-
cated by the polarity symbols (+ and –) marked
inside
3. Replace the cover.
When RECORD/BATT does not light steadily during
play, replace the batteries.
Warning:
Dispose of old batteries promptly and
properly. Do not bury or burn them.
Caution:
If you do not plan to use the SCR-100 with
batteries for two weeks or more, remove the batter-
ies. Batteries can leak chemicals that can destroy
electronic parts.
USING AC POWER
You can power the SCR-100 using a 3V, 300-mA AC
adapter and a size H Adaptaplug
®
(neither supplied).
Both are available at your local RadioShack store.
14-1252.fm Page 6 Thursday, October 28, 1999 3:27 PM