Filter
Top Products
16
PLAYING A TAPE
1. For mono playback, simply listen to the built-in
speaker. The SCR-100 combines the left and
right channels. For stereo playback, connect the
SCR-100 to a pair of stereo headphones or an
amplified speaker system (see “Connecting
Headphones/Speakers” on Page 10).
Note:
Connecting headphones or an amplified
speaker system disconnects the built-in speak-
ers.
2. Take up any slack in the tape by turning the cas-
sette’s hub with a pencil. Do not touch the
exposed tape.
3. Lift the cassette compartment door and insert
the cassette tape into the cassette guides with
its open edge facing up. Be sure the full reel is to
the right and the side you want to listen to faces
the door.
4. Set
TAPE SPEED
to the same speed you used
when you recorded the tape.
14-1252.fm Page 16 Thursday, October 28, 1999 3:27 PM