Filter
Top Products
9
USING VEHICLE BATTERY
POWER
You can power the SCP-97 from a vehicle’s 12V
power source (such as cigarette-lighter socket) using
a 3V, 300-mA DC adapter and a size H Adaptaplug
(neither supplied). Both are available at your local
RadioShack store.
Cautions:
You must use a power source that
supplies 3V DC and delivers at least
300 mA. Its center tip must be set to
negative and its plug must fit the SCP-97's
DC3V
jack. Using an adapter that does not meet these
specifications could damage the SCP-97 or the
adapter.
• Always connect the DC adapter to the SCP-97
before you connect it to the power source. When
you finish, disconnect the adapter from the pow-
er source before you disconnect it from the SCP-
97.
!
14-1244a.fm Page 9 Friday, August 6, 1999 12:54 PM