Filter
Top Products
8
DC3V
jack. Using an adapter that does not meet
these specifications could damage the SCP-97
or the adapter.
• Always connect the AC adapter to the SCP-97
before you connect it to AC power. When you
finish, disconnect the adapter from AC power
before you disconnect it from the SCP-97.
Follow these steps to power the SCP-97 from a stan-
dard AC outlet.
1. Set the adapter’s voltage switch to 3V.
2. Insert the size H Adaptaplug into the adapter’s
cord with the tip set to negative (–).
3. Insert the adapter’s barrel plug into the SCP-97’s
DC3V jack.
4. Plug the adapter into a standard AC outlet.
14-1244a.fm Page 8 Friday, August 6, 1999 12:54 PM