Filter
Top Products
10
Follow these steps to connect the SCP-87 to AC
power.
1. Set the adapter’s voltage switch to 3V.
2. Insert the adapter’s 3.4 mm outer diameter/1.3
mm inner diameter tip into the adapter’s cord, so
it reads –TIP.
3. Insert the plug into the SCP-87’s
DC 3V
jack.
4. Plug the adapter into a standard AC outlet.
Note:
Connecting the AC adapter automatically
disconnects internal batteries.
14-1230.fm Page 10 Friday, July 2, 1999 10:26 AM