Filter
Top Products
10
Follow these steps to connect the SCP-105 to AC power.
1. Set the adapter’s voltage switch to
3V
.
2. Insert the Adaptaplug into the adapter’s cord so it reads
+ TIP.
3. Insert the plug into the SCP-105’s
DC 3V
jack.
4. Plug the adapter into a standard AC outlet.
Using Vehicle Battery Power
You can power the SCP-105 from a vehicle’s 12V power
source (such as cigarette-lighter socket) using a 3V, 200-mA
DC adapter and a size A Adaptaplug
®
(neither supplied).
Both are available at your local RadioShack store.
Cautions:
You must use a power source that supplies
regulated 3V DC and delivers at least 200 mA.
Its center tip must be set to positive and its
plug must fit the SCP-105's
DC3V
jack. Using an adapter
that does not meet these specifications could damage
the SCP-105 or the adapter.
DC 3V
!
14-1246.fm Page 10 Thursday, January 13, 2000 1:04 PM