Optimus PRO-SWS300 Speaker User Manual


 
4
OPERATION
1. Turn on the audio source. Then
turn on the subwoofer’s power by
rotating
VOLUME/OFF/MAX
clock-
wise until it clicks, and set it to a
comfortable listening level. The
power LED lights.
We recommend you test the sub-
woofer and satellite speakers in
different locations to get the best
balance between your satellite
speakers and the subwoofer.
2. Rotate
BASS/MIN/MAX
to select
the desired low frequency sound
level.
3. When you are finished using the
system, turn it off by rotating
VOL-
UME/OFF/MAX
counterclockwise
until it clicks. Then turn off the
audio source.
CARE
Your Optimus PRO-SWS300 Ampli-
fied Multimedia Subwoofer Satellite
Speaker System is an example of su-
perior design and craftsmanship. The
following suggestions will help you
care for the speaker system so you
can enjoy it for years.
Keep the system dry. If it gets wet,
wipe it dry immediately. Liquids
might contain minerals that can
corrode the electronic circuits.
Use and store the system only in
normal temperature environ-
ments. Temperature extremes can
shorten the life of electronic
devices and distort or melt plastic
parts.
Handle the system gently and
carefully. Dropping it can damage
the circuit boards and can cause
the speakers to work improperly.
Keep the system away from dust
and dirt, which can cause prema-
ture wear of parts.
Wipe the system with a damp
cloth occasionally to keep it look-
ing new. Do not use harsh chemi-
cals, cleaning solvents, or strong
detergents to clean the system.
Modifying or tampering with your sys-
tem’s internal components can cause
a malfunction and might invalidate its
warranty. If your speaker system is
not operating as it should, take it to
your local RadioShack store for assis-
tance.
40-4076.fm Page 4 Wednesday, August 11, 1999 10:36 AM