Filter
Top Products
12
Special Features
Recording Blank Spaces Between Selections
Some cassette decks search for the blank spaces between selections so
you can quickly locate specific selections. If the original program does
not have blank spaces, you can add them when you make a new record-
ing.
While the cassette deck is set to record or record pause, press
REC MUTE
( ). The deck records 4
1
/
2
seconds of silence and pauses. To begin
recording again, press
PAUSE
( ) or the appropriate play button ( or ).
• To record a blank space of more than 4
1
/
2
seconds, press again
after the cassette deck pauses, or press and hold for the desired
length of time. To begin recording again, press ,
,
or .
• To record a blank space of less than 4
1
/
2
seconds, press before
4
1
/
2
seconds pass. To begin recording again, press ,
,
or .
Copying a Cassette Tape (Dubbing)
Notes:
• If the original recording has Dolby B NR or Dolby C NR, the copy
will also have it, regardless of the position of
DOLBY NR
. If the origi-
nal does not have Dolby NR, you cannot add it to the tape you are
dubbing.
•
REC LEVEL
does not affect the recording level during dubbing.
• Both decks automatically stops when either tape reaches the end.
We recommend you dub onto a tape that is the same length as the
original, so the decks stop at the same time.
To copy a cassette tape:
1. Press
POWER
to turn on the cassette deck.
2. Load the cassette tape you want to copy into Deck 1. Be sure the
side you want to copy faces you with the full reel to the left.
3. Load a blank tape (or one you want to record over) into Deck 2. Be
sure the side you want to record on is facing you and the full reel
is to the left.
4. Set
REV MODE
. See “Loading and Playing a Cassette Tape.”
5. Press on Deck 1 to set the tape direction, then press .
6. Press on Deck 2 to set the tape direction, then press .
7. To begin dubbing, press the appropriate
COPY
button:
NORMAL
to dub at normal playback speed.
HI-SPEED
to dub at twice the normal speed.
The cassette in Deck 1 automatically plays.
Both decks automatically stops when either tape reaches the end.
To manually stop dubbing, press on either deck; this stops both cas-
sette decks.