Filter
Top Products
40
Using the Remote Controller RC-479S with Your Other AV
Components
Connecting your -compatible Onkyo CD player, DVD
player, or cassette recorder to the TX-SR501/TX-SR501E
via allows you to control it with the TX-SR501/
TX-SR501E’s remote controller. Since you only need to
point the remote controller at the TX-SR501/TX-SR501E,
you can control components that are out of sight, for exam-
ple, in a cabinet. See page 19 for connection information.
Note:
•To use the function, you must make an connection
and an analog RCA/phono connection between the AV
component and your TX-SR501, even if they are con-
nected digitally.
Using the RC-479S
RC-479S (not North America)
1
Point the remote controller at the TX-SR501/
TX-SR501E and use the input selector but-
tons to select an input source for the
TX-SR501/TX-SR501E.
2
Use the remote controller’s mode buttons
(i.e., [DVD], [CD], or [RCVR/TAPE]) to select
a remote controller mode.
(You don’t have to point the remote controller at any-
thing for this step.)
3
Point the remote controller at the TX-SR501/
TX-SR501E and press the Power [ ] button
to turn on the AV component.
(A cassette recorder can’t be turned on or off from
the remote controller. However, pressing the remote
controller’s Play [ ] button will turn it on and start
playback.)
4
Use the buttons as explained below.
In the following illustrations, buttons that control the
TX-SR501/TX-SR501E regardless of which mode is
selected are shaded.
DVD mode CD mode Tape mode*
Power on/off
Start playback Play side A (front-facing side)
Stop playback, fast forward, or fast reverse Stop playback, recording, fast forward, or rewind
Fast forward
Fast reverse Rewind
Pause playback Play side B (rear-facing side)
Go to next chapter or track
* Since this is RCVR/TAPE mode, you can control
the cassette recorder and fully control the
TX-SR501/TX-SR501E at the same time.
Go to beginning of current chapter or track
DISC Select a disc (DVD/CD changers only)
1–9, +10, 0 Enter numbers
TOP MENU Display the disc’s main menu
MENU Display the last sub-menu
RETURN Return to previous menu
SETUP Display setup menu
Select menu items
ENT Go to selected menu item
DVD
3.
2.
4.
1.
DVD
control
buttons
DVD
input
selector
CD
3.
2.
4.
1.
CD
control
buttons
CD input
selector
RCVR/TAPE
2.
3.
1.
Tape control
buttons
Tape input
selector
/
/ //