Onkyo TX-SA806 Stereo Receiver User Manual


 
94
Advanced Setup—Continued
SIRIUS Parental Lock
(on North American model)
This item is for use with SIRIUS Satellite Radio. It’s not
available if “SAT Radio Mode” is set to “None”. See the
separate Satellite Radio Guide for more information.
Analog Multich
Subwoofer Input Sensitivity
Some DVD players output the LFE channel from their
analog subwoofer output at 15 dB higher than normal.
With this setting, you can change the AV receiver/AV
amplifier’s subwoofer sensitivity to match your DVD
player. Note that this setting only affects signals con-
nected to the AV receiver/AV amplifier’s DVD SUB-
WOOFER jack.
You can select 0 dB, 5 dB, 10 dB, or 15 dB.
If you find that your subwoofer is too loud, try the 10 dB
or 15 dB setting.
HDMI
Monitor Out
See “Monitor Setup” on page 41.
Output Resolution
You can specify the output resolution for the HDMI out-
puts and have the AV receiver/AV amplifier upconvert
the picture resolution as necessary to match the resolu-
tion supported by your TV.
See the “Video Resolution Chart” on page 122 to see
how the AV receiver/AV amplifier handles video input at
different resolutions.
Note:
For optimal video performance, THX recommends that
the “Output Resolution” be set to “Through.”
Zoom Mode
This setting determines the aspect ratio.
Normal:
Full:
Zoom:
Wide Zoom:
Through: Select this to pass video through the AV
receiver/AV amplifier at the same resolution
and with no conversion (default).
Auto: Select this to have the AV receiver/AV
amplifier automatically convert video at res-
olutions not supported by your TV.
(Not available when the “Monitor Out” set-
ting is set to “Analog”.)
480p (480/576p):
Select this for 480p or 576p output and
video conversion as necessary.
720p: Select this for 720p output and video con-
version as necessary.
1080i: Select this for 1080i output and video con-
version as necessary.
1080p: Select this for 1080p output and video con-
version as necessary.
(Not available when the “Monitor Out” setting
is set to “Analog”.)
Auto: The AV receiver/AV amplifier automati-
cally selects the Zoom Mode in accordance
with the input signal (default).
TX-SR806_En.book Page 94 Monday, August 4, 2008 10:25 AM