Onkyo TX-NR5009 Stereo Receiver User Manual


 
14
En
About Speakers A and Speakers B
Installing Speakers A and Speakers B allows you to enjoy up to 7.2-channel surround-sound playback from each speaker
configuration. Each configuration has its own pair of stereo front speakers and can use the same subwoofer, center,
surround, front high, and surround back speakers, as required. You could, for example, use Speakers A when watching a
DVD movie with 7.2-channels surround sound and use Speakers B for serious music listening with a pair of stereo
speakers (2-channels).
Speakers A and Speakers B can be wired normally or bi-amped, but cannot be bi-amped at the same time. For example,
if Speakers B are bi-amped, Speakers A can only be wired normally.
See also:
“Speaker Settings” (page 51)
“Speaker Configuration” (page 52)
“Selecting Speaker Layout” (page 45)
The versatility offered by the Speakers A and Speakers B configurations means you can configure the AV receiver to suit
your exact requirements and application. Two typical applications are shown below.
Note
You cannot set speaker impedance individually for Speakers A and Speakers B.
Speakers A: 7.2-channel playback
Speakers B: Stereo playback
In this example, Speakers A provides 7.2-channel
surround sound for enjoying DVD movies, while
Speakers B is used for serious music listening with a pair
of top-quality stereo speakers.
Speakers A: 5.2-channel playback
Speakers B: 2.1-channel playback with bi-amped
front speakers
In this example, Speakers A provides 5.2-channel
surround sound for enjoying DVD movies, while
Speakers B is bi-amped for use with a pair of bi-amp
capable speakers. Subwoofer 1 is used with Speakers A
and Speakers B.
FL C FR
FL FR
SL
SBL SBR
SW1
SW2
SR
Speakers A
Speakers B
FL C FR
FL FR
SL
SW1
SW2
SR
Speakers A
Speakers B
Speaker Impedance
Speakers Type(Front A)
Speakers Type(Front B)
Powered Zone 2
Powered Zone 3
Front High + Front Wide
6ohms
Normal
Normal
No
No
No
2–1. Speaker Settings
Speaker Impedance
Speakers Type(Front A)
Speakers Type(Front B)
Powered Zone 2
Powered Zone 3
Front High + Front Wide
6ohms
Normal
Bi-Amp
No
No
No
2–1. Speaker Settings
2–2. Speaker Configuration
Subwoofer
Front
Center
Surround
Front High
Surround Back
Use
Use
Use
Use
Not Use
Use
Speakers A
2–2. Speaker Configuration
Subwoofer
Front
Center
Surround
Front High
Surround Back
Use
Use
Use
Use
Not Use
Not Use
Speakers A
2–2. Speaker Configuration
Subwoofer
Front
Center
Surround
Front High
Surround Back
Not Use
Use
Not Use
Not Use
Not Use
Not Use
Speakers B
2–2. Speaker Configuration
Subwoofer
Front
Center
Surround
Front High
Surround Back
Use
Use
Not Use
Not Use
Not Use
Not Use
Speakers B