Filter
Top Products
26
Setup menus
When making the various settings required to configure your TX-DS797 optimally, you can either use the OSD menu that appears on your
television monitor or you can use the display on the front of the TX-DS797. The OSD menu is a settings menu that is displayed on your TV
monitor. For use as reference when performing the setting procedures, this manual shows both the OSD menu displayed on your television
monitor and the display on the front of the TX-DS797.
The Setup menu consists of a main screen that is divided up into 5 menus: Hardware Setup, Speaker Setup, Input Setup, Audio Adjust, and
Preference. These menus are then divided up into various sub-menus, and these contain settings for you to optimize your home theater as you wish.
4.Preference
1.Volume Setup
2.Headphone Level Setup
3.OSD Setup
4.OSD Position
Quit:|SETUP|
4.Preference
1.Volume Setup
2.Headphone Level
3.OSD Setup
4.OSD Position
|ENTER|Quit:|SETUP|
3.Audio Adjust
9.THX Setup
10.Mono Movie Setup
11.Enhanced 7 Setup
12.Orchestra Setup
13.Unplugged Setup
14.Studio Mix Setup
15.TV Logic Setup
→
default
3.Audio Adjust
1.Tone Control
2.Surround Speakers
3.Sound Effect
→
default
3.Audio Adjust
1.Tone Control
2.Surround Speakers
3.Sound Effect
4.Delay
5.LFE Level
6.Mono Setup
7.Theater Dimensional
8.Surround Setup
1.Speaker Setup
1.Speaker Config
2.Speaker Distance
3.Level Calibration
2.Input Setup
1.Digital Setup
2.Multichannel Setup
3.Video Setup
4.Character Input
5.Intelli Volume
6.Listening Mode Preset
|ENTER|Quit:|SETUP|
Input:DVD
2.Input Setup
1.Digital Setup
2.Multichannel Setup
3.Video Setup
4.Character Input
5.Intelli Volume
|ENTER|Quit:|SETUP|
Input:DVD
1.Speaker Setup
1.Speaker Config
2.Speaker Distance
3.Level Calibration
4.Bass Peak Level
Quit:|SETUP|
|ENTER|Quit:|SETUP|
|ENTER|Quit:|SETUP|
0.Hardware Setup
1.Speaker Impedance
2.IR IN Setup
3.AM Frequency Setup
0.Hardware Setup
1.Speaker Impedance
|ENTER|Quit:|SETUP| |ENTER|Quit:|SETUP|
Advanced Menu
0.Hardware Setup
1.Speaker Setup
2.Input Setup
3.Audio Adjust
4.Preference
|ENTER|Quit:|SETUP|
→
Basic Menu
Basic Menu
0.Hardware Setup
1.Speaker Setup
2.Input Setup
3.Audio Adjust
|ENTER|Quit:|SETUP|
→
Advanced Menu
Advanced Menu
The Advanced Menu provides an
Advanced Setup Menu with features
such as the Listening Mode Presets that
allow you to customize the output sound
for movies and music just the way you
like and the AV Sync Setup that allows
you to adjust for discrepancies between
the video and audio timing.
Basic Menu
Your TX-DS797 is provided with a
Basic Setup Menu for those who are
not familiar with many of the
advanced settings of an AV receiver
or those who wish to watch movies
and listen to music with the minimal
amount of setup. With the Basic
Setup Menu, the settings that rarely
need to be set or that are not needed
for a reasonably good degree of
sound quality are not displayed.
Settings listed with
next to their
name are settings that can be set
using the Basic Setup Menu.
Note:
Once you set the Speaker Impedance setting at the
Hardware Setup menu, the setting will not be
displayed again when you enter the Basic Menu.