Onkyo TX-DS676 Stereo Receiver User Manual


 
15
Connecting the included antennas
Connecting the FM indoor antenna:
The FM indoor antenna is for indoor use only. Extend the antenna
and move it in various directions until the clearest signal is received.
Fix it with push pins or similar implements in the position that will
cause the least amount of distortion.
If the reception is not very clear with the attached FM indoor an-
tenna, the use of an outdoor antenna is recommended.
Making antenna connections
Connecting an FM outdoor antenna
Please make sure that you follow the considerations below regard-
ing the location.
Keep the antenna away from noise sources (neon signs, busy roads,
etc.).
It is dangerous to put the antenna close to power lines. Keep it well
away from power lines, transformers, etc.
To avoid the risk of lightning and electrical shock, grounding is
necessary. Follow item 19 of the “Important Safeguards” on
page 2 when you install the outdoor antenna.
Connecting the AM loop antenna:
The AM loop antenna is for indoor use only. Set it in the direction
and position where you receive the clearest sound. Put it as far away
as possible from the unit, TVs, speaker cables, and power cords.
When reception is not satisfactory with the attached AM loop an-
tenna alone, connection of an outdoor antenna is recommended.
AM
FM
75
ANTENNA
Remove the insulation at
the end of the cable, then
fully insert the stripped
end of the cable.
AM
FM
75
ANTENNA
AM
FM
75
ANTENNA
U.S. and Canadian
models
Others
Outdoor
antenna
Connecting an AM outdoor antenna
The outdoor antenna will be more effective if it is stretched horizon-
tally above a window or outside.
Do not remove the AM loop antenna.
To avoid the risk of lightning and electrical shock, grounding is
necessary. Follow item 19 of the “Important Safeguards” on
page 2 when you install the outdoor antenna.