Filter
Top Products
13
Handling cassette tapes
Examine cassette tapes carefully before using them with the casette tape deck.
1. 2.
No! No!
No! No!
Erasure prevention
Cassette tapes are constructed with erasure
prevention tabs to prevent accidental
erasure of the tape.
1 If you wish to protect a recording from
accidental erasure, break off the tab(s)
on the appropriate side(s). It will no
longer be possible to use the recording
button with such a cassette.
2 If at some later date you wish to record
the cassette, simply cover the hole(s)
with small pieces of cellophane tape.
• Be sure not to cover the holes for
detecting high-position tapes.
Loose tape
Loose tape can cause tangling around the
pinch roller and capstan and jam the
mechanism.
Remove any tape slack with a pencil or
similar device as shown in the diagram.
Tapes not recommended
1. C-120 tapes
C-120 tape is thin and therefore easily
broken. There is a possibility that tape
could get caught on the pinch roller or
capstan.
2. Endless tapes
Do not use endless tapes.
Tape storage
• Do not touch the tape surface.
• Do not put thick paper or cardboard
labels in the cassette holder.
• Do not put tapes near magnetic sources
(speakers, amplifiers, TVs, etc.) Your
important recording might be erased or
damaged.
• Do not expose cassettes to direct
sunlight.
A
A
A
High position
detection hole
A
AB