Onkyo SKB-520 Speaker System User Manual


 
7
Troubleshooting
Specifications
Powered Subwoofer (SKW-520)
Type: Bass-reflex
Input sensitivity/impedance: 330 mV / 100 k
Maximum output power: 220 W (Dynamic Power)
Frequency response: 25 Hz–150 Hz
Cabinet capacity: 1.35 cubic feet (38.5 L)
Dimensions (W
× H × D):
10-13/16"
×
20-3/8"
×
16-3/16"
(275 × 518 × 411 mm)
Weight: 30 lbs. (13.6 kg)
Drivers unit: 10 inch Cone Woofer
Power supply: AC 120 V, 60 Hz
Power consumption: 150 W
Other: Auto Standby function
Front Speaker (SKF-520F)
Type: 2 Way Bass-reflex
Impedance: 8
Maximum input power: 130 W
Output sound pressure level:
87 dB/W/m
Frequency response: 55 Hz–50 kHz
Crossover frequency: 4.5 kHz
Cabinet capacity: 0.38 cubic feet (10.8 L)
Dimensions (W
× H × D):
7-7/16"
×
16-1/2"
×
9-5/16"
(189
× 419 × 236 mm)
Weight: 12.1 lbs. (5.5 kg)
Drivers unit: 5-1/4 inch OMF Cone
Woofer
× 2
1 inch Balanced Dome
Ter minal: Color-coded push type
Other: Magnetic shielding
Center Speaker (SKC-520C)
Type: 2 Way Bass-reflex
Impedance: 8
Maximum input power: 130 W
Output sound pressure level:
85 dB/W/m
Frequency response: 60 Hz–50 kHz
Crossover frequency: 4,5 kHz
Cabinet capacity: 0.27 cubic feet (7.7 L)
Dimensions (W
× H × D):
15-1/4"
×
6-3/16"
×
7-15/16"
(387 × 157 × 202 mm)
Weight: 8.2 lbs. (3.7 kg)
Speaker: 4 inch OMF Cone Woofer
× 2
1 inch Balanced Dome
Ter minal: Color-coded push type
Other: Magnetic shielding
Surround Speaker (SKM-520S/SKB-520)
Type: 2 Way Bass Reflex
Impedance: 8
Maximum input power: 130 W
Output sound pressure level:
82 dB/W/m
Frequency response: 60 Hz–50 kHz
Crossover frequency: 5 kHz
Cabinet capacity: 0.09 cubic feet (2.7 L)
Dimensions (W
× H × D):
6-7/8"
×
10-7/16"
×
4-15/16"
(175
× 265 × 125 mm)
Weight: 3.7 lbs. (1.7 kg)
Speaker: 4 inch Cone Woofer
1 inch Balanced Dome
Ter minal: Color-coded push type
Specifications and appearance are subject to change
without prior notice.
Symptom Possible cause Remedy
There’s no sound coming
from certain speakers?
The speaker cables are not connected properly. Check the speaker cables and correct as necessary.
The speaker configuration is not set correctly. Check the speaker configuration.
The subwoofer does not
turn on?
The power plug is not fully inserted into the wall
outlet.
Insert the power plug fully into the wall outlet.
The subwoofer produces
no sound?
The OUTPUT LEVEL control is set to minimum. Turn up the OUTPUT LEVEL control.
The RCA cable is not properly connected to the
subwoofer’s LINE INPUT.
Make sure that the RCA cable is properly connected to
the subwoofer’s LINE INPUT.
The level of the input signal was too low and the
subwoofer entered Standby mode.
Slightly increase the subwoofer pre out output level on
your AV receiver.
The Subwoofer configuration is not set correctly.
For HT-R520 speaker package:
The subwoofer setting is set to No in the
speaker configuration on the HT-R520.
Check the subwoofer setting in the speaker configura-
tion on your AV receiver.
The subwoofer produces
hardly any sound?
The source material contain little or no bass con-
tent.
Choose source material with more bass content.
A humming sound can be
heard from the sub-
woofer?
The RCA cable is not properly connected to the
subwoofer’s LINE INPUT.
Make sure that the RCA cable is properly connected to
the subwoofer’s LINE INPUT.
External interference from a TV or other elec-
tronic device is being picked up.
Move the subwoofer and RCA cable away from the
interference source. Make sure your audio system is
grounded properly.