Filter
Top Products
31
Input Setup
IntelliVolume
When switching input sources, you may find that the output level for
different components or input sources connected to the TX-DS595 is
different even though the main volume setting is the same. Under
normal circumstances, you would then have to change the volume
setting each time you change the input source. This IntelliVolume
allows you to preset a volume level for each input source separately
so that when you do switch from one input source to another, the TX-
DS595 adjusts the volume accordingly so that the resulting volume
stays the same.
1. Select the desired input source.
2. Press the SETUP button.
Turn the jog dial or press the
and cursor
buttons on the remote controller to display
“2. INPUT SETUP.”
3. Press the jog dial or ENTER button
on the remote controller.
Turn the jog dial or press the
cursor button
on the remote controller to display
“INTELLIVOLUME?”.
FM AM PHONO C
DTAPEVIDEO 2 VIDEO 3VIDEO 1DVD
VCR
4. Press the jog dial or ENTER button
on the remote controller.
The currently set volume level appears.
5. Turn the jog dial or press the and
cursor buttons on the remote
controller to set the IntelliVoleme.
It can be adjusted between -12 and +12
decibels.
6. Press the RETURN button.
“INTELLIVOLUME?” appears in the front
display.
To exit the setup mode immediately, press
the SETUP button.
SETUP
PUSH TO ENTER
DSP
/
MODE ADJ
PUSH TO ENTER
DSP
/
MODE ADJ
TX-DS595
Remote controller
PUSH TO ENTER
DSP
/
MODE ADJ
SETUP
PUSH TO ENTER
DSP
/
MODE ADJ
PUSH TO ENTER
DSP
/
MODE ADJ
RETURN
dB